South Lanarkshire · Scotland

Non-Slip Bath Coating in Wilsontown

Clear non-slip coatings for baths and shower trays in Wilsontown, carried out at your home and guaranteed for a year.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Wilsontown?

Non-slip bath coating in Wilsontown without replacing anything

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Our technicians work on enamelled baths, wet room floors (ask us) and resurfaced baths, and people most frequently call us about resurfaced baths that are now too smooth and a bath or tray that is slippery when wet.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Location
Wilsontown (ML11)
Region
South Lanarkshire
Guarantee
12 months on all our work
Price
Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Signs you need non-slip bath coating in Wilsontown

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

You may need us if you’ve spotted:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth

Before you book anyone

  • What preparation is included
  • Whether there are any call-out or travel charges
  • What protection goes down before work starts
  • Who turns up on the day

10 questions to ask before booking

Wilsontown and the surrounding area

Wilsontown is about 7 miles north-east of Carluke, in South Lanarkshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover 139 places in South Lanarkshire. Our nearest city page is Edinburgh, about 22 miles away.

Here we cover the ML11 postcode area. We also travel to Forth (1 mile south-west), Haywood (1 mile east), Greenwall (1 mile west), Climpy (1 mile west) and Braehead (2 miles south). Larger places within reach include Hamilton (15 miles west), Larkhall (12 miles west), Carluke (7 miles south-west), Lanark (8 miles south-west), Viewpark (15 miles west) and Neilsland (15 miles west).

Landmarks near Wilsontown

In Wilsontown, that means homes near Forth. The nearest railway station is Breich station, about 3.7 miles north. A little further out are Couthally Castle (4.2 miles south). For a walk, there’s Corse Law.

Map of Wilsontown © OpenStreetMap contributors

Landlords, agents and businesses in Wilsontown

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Repair or replace in Wilsontown?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

What you get with us

  • Straight answers about what a repair can do
  • We come to you, anywhere in the UK
  • We leave the room as we found it
  • One visit for most repairs

Take a look at our prices page.

How it works

We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the work takes a morning or an afternoon. Before we leave, we explain how soon it can be used and how to care for it.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, usually overnight.

Preparing for the visit

  • Keep children and pets away from the room on the day
  • Tell us if there are stairs or a lift
  • Tell us about parking, stairs or access

Get a quote

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.

Send photos for a quote

Related advice

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.

What non-slip bath coating costs

You will not pay by the hour. The price depends on:

  • How easy the damage is to reach
  • How many items we do on one visit
  • How many areas need work
  • Unusual colours or finishes

Our prices are the same across the UK, with no extra for Wilsontown. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Quotes from your photos

Most quotes are done from photos alone. To make it quick:

  • Details of any past repairs
  • Where you are, by postcode
  • A close-up of the damage, in focus
  • A wider photo showing the whole bath or shower tray

Upload a photo of the damage and one of the entire item, and tell us you’re in Wilsontown, and we’ll reply with a fixed price.

What a repair cannot fix

A repair isn’t always the answer, and we’d rather say so up front. Repairs will not solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer before booking.

Materials we work on in Wilsontown

  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths

Wilsontown: your questions answered

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Are there extra charges for Wilsontown?

There is no separate call-out charge. Your fixed price includes everything.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Do you come to Wilsontown?

Yes, we do. We send a technician to Wilsontown for every job, with no extra charge for travel.

What does non-slip bath coating cost?

Because every job differs, we price from photos. You know the full cost before anything is booked.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.