Carmarthenshire · Wales
Non-slip bath & shower coating in Furnace, Carmarthenshire
Non-slip bath coating across Furnace and nearby, done in a single visit in most cases.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
About our non-slip bath coating in Furnace
It’s popular with homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. We’re frequently asked to fix resurfaced baths that are now too smooth and safety for older or less mobile people, in shower trays, resurfaced baths and enamelled baths.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Furnace (SA15)
- Region
- Carmarthenshire
- Cover
- One year on every repair
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
How we price non-slip bath coating
Prices are worked out job by job, from your photos. What matters most is:
- Doing more than one item at once
- Any earlier repairs that need removing first
- The material
- Access to the area
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.
Send photos for a quote
It only takes a minute to photograph the damage. Please include:
- Details of any past repairs
- The material, if you know it
- Good light, ideally daylight, without flash glare
- One picture of the whole bath or shower tray
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
What we can’t put right
Before booking, it’s worth knowing the limits too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Shower trays
- Resurfaced baths
- Enamelled baths
- Acrylic baths
- Wet room floors (ask us)
Furnace: your questions answered
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
What happens if you find more damage?
Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
What does non-slip bath coating cost?
Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
What areas do you cover?
All of Carmarthenshire, and the rest of the UK. Travel is included in the price.
Do you need non-slip bath coating in Furnace?
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
These are the problems we are asked about most:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
What to look for in a quote
- Is the price fixed, and does it include VAT?
- How soon you can use it again
- What aftercare is recommended
- How your room will be protected
For landlords and businesses
If you manage property in Furnace, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
How the visit works
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take a few hours, and you are welcome to carry on with your day while we work.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- We leave it to cure, normally overnight.
Before we arrive
- Mention any parking restrictions or tricky access
- Open a window if you can
- Let the surface dry out before the visit
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can price the job the same day in most cases.
Advice
Furnace and the surrounding area
Furnace is about 1 mile north of Llanelli Rural, in Carmarthenshire. From the centre of Furnace to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Furnace is one of 195 places in Carmarthenshire where we work.
Jobs in SA15 are booked in the same way as anywhere else. That includes homes on New Road, Old Road and Cwmbach Road. Other places close to Furnace include Stradey (1 mile west), Pentre-poeth (1 mile north-east), Tŷ'r-frân (1 mile east), Sandy (1 mile south-west) and Llanelli Rural (1 mile south). Within a short drive, we also cover Carmarthen (13 miles north-west), Ammanford (10 miles north-east), Burry Port (4 miles west), Betws (10 miles north-east), Pembrey and Burry Port Town (4 miles west) and Achddu (3 miles west).
Near you in Furnace
In Furnace, that means homes near Stradey Arms, Old Road C.P. Primary School and Ysgol Gyfun y Strade and the streets around them. Nearby too are Millennium Coastal Park (1.4 miles west), Hall Street English Methodist Church (0.5 miles south) and St. John Lloyd (1.5 miles east). Furnace’s nearest station is Llanelli station, about 1.2 miles south of the centre. A little further out are Parc Howard Museum (under half a mile east) and Llanelli Old Castle (0.6 miles south). The countryside around Furnace includes Pen Waun Twmpath and WWT Llanelli Wetland Centre.
Repair or replace in Furnace?
Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Our prices are the same across the UK, so there’s no premium for Furnace. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- No extra charge for your area
- Everything repaired in place
- Normally one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list.
Towns and villages near Furnace
More services for Furnace
About our accreditations · Every repair comes with a one-year guarantee.
