Perth and Kinross · Scotland
Bath Re-enamelling for Gellyburn homes
Bath re-enamelling for Gellyburn, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
What we can’t put right
A repair is not right for every job, including:
- A bath split right through the body
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Gellyburn
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
About our bath re-enamelling in Gellyburn
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include wear marks under the taps and staining under the taps and around the waste, in cast iron baths, pressed steel baths and Victorian roll-tops.
You get a one-year guarantee, the same in Gellyburn as everywhere else we work.
- Location
- Gellyburn (PH1)
- Region
- Perth and Kinross
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Gellyburn
What else we do in Gellyburn
Landlord and trade work in Gellyburn
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Gellyburn, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
Common questions in Gellyburn
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens after I send pictures?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Our work in Gellyburn
Gellyburn is about 6 miles south-west of Blairgowrie and Rattray, in Perth and Kinross. Wherever you are in the PH1 postcode area, we come to you. Gellyburn is one of 107 towns and villages in Perth and Kinross where we work. Our jobs stretch from Gellyburn to Edinburgh (42 miles away).
All of PH1 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Murthly (1 mile south-east), Caputh (1 mile north-west), Middleton (1 mile north-west), Spittalfield (1 mile north-east) and Bankfoot (3 miles south-west). Within a short drive, we also cover Perth (9 miles south), Blairgowrie and Rattray (6 miles north-east), Letham (9 miles south), Scone (8 miles south), Pitlochry (15 miles north-west) and Tulloch (8 miles south).
What’s near Gellyburn
Around Gellyburn, we work in homes near Caputh Parish Church and the streets around them. The closest station to Gellyburn is Dunkeld & Birnam station, roughly 4.3 miles west of the centre. Nearby you will also find Blairgowrie Community Hospital (5.9 miles north-east) and Murthly Castle (1.6 miles west). Green spaces nearby include Lily Loch and Birnam Hill.
What affects the price in Gellyburn
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Any earlier repairs that need removing first
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
Our prices are the same across the UK, with no extra for Gellyburn. What changes the price is the job itself: how much damage, what it’s made of and how many items.
How to get a fixed price
When you take your photos, a few simple things make all the difference:
- A photo taken from further back
- Any details about the material
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
To get a price, send two or three pictures through our quote form or call us. We’ll say immediately if a repair is the right fix.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Respect the curing time we give you
- Keep toiletries on a shelf rather than in the bath
- Do not leave a chip unrepaired
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
What we’re called out for in Gellyburn
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Send us a picture if you notice any of these:
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
- A roll-top that is seen better days
- Brown or grey marks that don’t clean off
What to look for in a quote
- How the room is protected while they work
- What happens if the damage is worse than the photos show
- Whether there are any call-out or travel charges
- Whether the colour is mixed to match
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a full day. If we find something your pictures didn’t show, we will explain it before carrying on.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
Getting a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Advice
Repairing versus replacing in Gellyburn
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, with the bath ready the following day. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why Gellyburn clients choose us
- We come to you, anywhere in the UK
- A year’s guarantee on all work
- Colour mixed on the day to match
- We’ll tell you if it’s not worth repairing
See our pricing or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
