Cumbria · England

Non-slip bath & shower coating in Gilcrux, Cumbria

Non-slip bath coating for Gilcrux, without a refit. Send us photos for a fixed price, then we come to you.

  • Safety for older or less mobile people
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Gilcrux

How we price non-slip bath coating

There are no hourly rates or hidden extras. The price is based on:

  • How easy the damage is to reach
  • The type of damage
  • How many areas need work
  • Previous DIY repairs that have to come out

The price reflects the work involved, not your postcode. You will see the full price before you book.

How to get a fixed quote

The better the pictures, the more accurate the price. Here’s what helps:

  • Whether it’s been repaired or coated before
  • A coin beside the damage so we can judge size
  • Any details about the material
  • One sharp close-up of the damage

Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.

Non-slip bath coating at your home in Gilcrux

It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Our technicians work on enamelled baths, acrylic baths and resurfaced baths, and the jobs we see most are resurfaced baths that are now too smooth and safety for older or less mobile people.

A one-year guarantee comes with the work, just as it does everywhere we cover. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Area
Gilcrux (CA7)
County
Cumbria
Cover
A year, on every repair
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026

Honest limits

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths
  • Acrylic baths

Covering Gilcrux

Gilcrux is about 9 miles north-east of Workington, in Cumbria. Jobs in Gilcrux are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Our repair technicians cover 438 places in Cumbria, from the larger towns to small villages. We work right across the region, from Gilcrux to Newcastle upon Tyne (72 miles away).

Here we cover the CA7 postcode area. Other places close to Gilcrux include Tallentire (1 mile south), Prospect (2 miles north), Plumbland (2 miles east), Crosby (2 miles west) and Crosscanonby (3 miles west). We also work in nearby towns such as Workington (9 miles south-west), Whitehaven (15 miles south-west), Maryport (5 miles west), Cockermouth (5 miles south), Keswick (13 miles south-east) and Moorclose (9 miles south-west).

Around Gilcrux

Typical jobs here are in homes near Church of St Mary, among other places. For rail, the closest station is Aspatria station, roughly 3 miles north-east. Other landmarks nearby include Hayton Castle (2.5 miles north). Green spaces nearby include Clints Crags and Linskeldfield Tarn.

Map of Gilcrux © OpenStreetMap contributors

Questions from Gilcrux

What happens once I’ve sent photos?

We come back with a fixed quote, generally with dates to choose from. There’s no obligation to book.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

Do you cover Gilcrux?

Yes, we do. We send a technician to Gilcrux for every job, with no extra charge for travel.

What does non-slip bath coating cost?

Because every job differs, we price from photos. You know the full cost before anything is booked.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

Can I add another job to the visit?

Of course, and it usually saves money. Just add the extra items to your pictures and we will quote them together.

Do you hold any accreditations?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you cover the entire of Cumbria?

We cover the whole UK, including Gilcrux and the rest of Cumbria. Just include your postcode and we’ll offer you dates.

Repairing versus replacing in Gilcrux

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.

Why book with us

  • Dust sheets down, tidy finish
  • We will tell you if it’s not worth repairing
  • Fixed prices from your pictures
  • Work done at your home or business

Take a look at our prices page.

What we do, step by step

You do not need to empty the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It normally takes a morning or an afternoon, and you are welcome to carry on with your day while we work.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, usually overnight.

Preparing for the visit

  • Have a window or extractor fan available
  • Keep pets and children out of the room while we work
  • Let us know about parking or access

Get a quote

The quickest way to a price is to send two or three pictures through our quote form or call us. We will say immediately if a repair is the right fix.

Get a fixed quote

Read more

When to call us in Gilcrux

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Keep an eye out for these signs:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth

Questions to ask before booking

  • What happens if the damage is worse than the pictures show
  • Whether a trained technician does the job
  • What aftercare is recommended
  • Whether there are any call-out or travel charges

How to compare quotes

Landlord and trade work in Gilcrux

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Landlords, letting agents and housing providers in Gilcrux use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.