Angus · Scotland

Non-Slip Bath Coating for Glamis homes

Clear non-slip coatings for baths and shower trays for homes and businesses in Glamis and across Angus. Send photos for a free, fixed quote.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Glamis

About our non-slip bath coating in Glamis

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Common call-outs are for worn-out textured areas and bath mats that harbour mould or get forgotten, on resurfaced baths, enamelled baths and wet room floors (ask us).

Every job is backed for twelve months in Glamis and everywhere else. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Location
Glamis (DD8)
County
Angus
Guarantee
A year, on every repair
Price
Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Your questions about non-slip bath coating in Glamis

When can you do it?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

How do I get a price for non-slip bath coating in Glamis?

We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Is my repair covered?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Can you repair something that’s been repaired before?

Generally, yes. Tell us what was done before and we will plan for it.

Is there any odour?

Expect a mild smell while we’re working, which fades afterwards.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Can you price it without visiting?

Usually, yes. Clear pictures let us give you a fixed quote without visiting.

Will I see the coating?

Very little: the treated area looks slightly matt.

What we can’t put right

Before booking, it’s worth knowing the limits too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before booking.

What we work on

  • Enamelled baths
  • Wet room floors (ask us)
  • Resurfaced baths
  • Shower trays
  • Acrylic baths

How we price non-slip bath coating

You will know the full cost before booking. We look at:

  • The material
  • Access to the area
  • How hard the colour is to match
  • Whether old repairs or coatings need taking off

A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.

Getting a price from pictures

Two or three clear pictures are usually enough. Try to include:

  • The material, if you know it
  • Where you are, by postcode
  • Natural light rather than flash
  • A wider photo showing the entire bath or shower tray

Email us pictures of the damage and a wider shot of the whole item, and tell us you’re in Glamis, and we’ll come back with a fixed quote.

Signs you need non-slip bath coating in Glamis

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Signs it’s time to call us include:

  • Safety for older or less mobile people
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth

Comparing quotes

  • How long it needs to cure
  • How to care for the finish
  • What happens if they find more damage
  • Whether the colour is mixed to match

How to compare quotes

What happens on the day

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow a few hours from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Make sure the room can be ventilated
  • Ensure the area is dry

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a fixed price

Advice

Work for landlords and builders

We regularly work with letting and managing agents. Just send photos, the address and how to get access.

Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Repair or replace: which is better?

The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Why book with us

  • Typically one visit, start to finish
  • We will tell you if it’s not worth repairing
  • Nothing taken out or refitted
  • CHAS, Constructionline and SafeContractor accredited

Take a look at our pricing.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Glamis and the surrounding area

Glamis is about 5 miles south-west of Forfar, in Angus. Across the DD8 area, a technician comes to you. Our repair technicians cover 40 places in Angus. You can also see our page for Edinburgh, about 46 miles away.

Here we cover the DD8 postcode area. Jobs here include addresses on Main Street, Dundee Road and Strathmore Road and the roads around them. Close by, we cover Douglastown (2 miles east), Westmuir (4 miles north), Padanaram (4 miles north-east), Maryton (4 miles north) and Inverarity (4 miles east). Within a short drive, we also cover Forfar (5 miles north-east), Carnoustie (13 miles south-east), Kirriemuir (5 miles north), Hunter's Town (13 miles south-east), Gardynebourg (13 miles south-east) and West Haven (14 miles south-east).

Local landmarks in Glamis

In Glamis, that means homes near St Fergus's Church. Other landmarks nearby include Glamis Castle (0.9 miles north) and Angus Folk Museum (within half a mile north). For a walk, there’s Loch of Forfar and Gallow Hill.

Map of Glamis © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.