Dumfries and Galloway · Scotland
Non-Slip Bath Coating for Glenluce homes
Non-slip bath coating in Glenluce without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
Repair or replace: which is better?
The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- One-year guarantee on every repair
- No extra charge for your area
See our pricing.
Non-slip bath coating in Glenluce, done in place
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Common call-outs are for resurfaced baths that are now too smooth and worn-out textured areas, in enamelled baths, wet room floors (ask us) and shower trays.
All our work is covered by a one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Glenluce (DG8)
- County
- Dumfries and Galloway
- Cover
- One year on every repair
- Quotes
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Common problems we fix in Glenluce
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Clients normally contact us about:
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
What your quote should include
- How the colour is matched
- Who will actually do the work
- How long it needs to cure
- How the room is protected while they work
What non-slip bath coating costs
Every quote is fixed and free. What we take into account:
- How much damage there is
- The material and finish
- Doing more than one item at once
- How easy the damage is to reach
A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
How to get a fixed price
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- A picture taken from further back
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- The material, if you know it
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job.
What a repair can’t fix
To be straight with you, there are a few things a repair will not fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Shower trays
Landlords, agents and businesses in Glenluce
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Where we work around Glenluce
Glenluce is about 9 miles east of Stranraer, in Dumfries and Galloway. Across the DG8 area, we carry out the work at your property. Our repair technicians cover all 138 towns and villages in Dumfries and Galloway, from the larger towns to small villages. You can also see our page for Glasgow, about 71 miles away.
Every address in DG8 is covered, from the main roads to the quietest streets. Local streets include Main Street, St John Street and Balkail Avenue. Other places close to Glenluce include Dunragit (3 miles west), New Luce (5 miles north), Castle Kennedy (6 miles west), Aird (7 miles west) and Lime Kiln (7 miles west). Further out, we also cover Stranraer (9 miles west), Newton Stewart (14 miles north-east), Portpatrick (12 miles west), Wigtown (15 miles east) and Minnigaff (14 miles north-east).
Around Glenluce
In Glenluce, that means homes near Glenluce and the streets around them. Open spaces near Glenluce include Whitefield Loch and Knock Fell.
Nearby places to Glenluce
What else we do in Glenluce
How the visit works
We agree an arrival time beforehand, so you are not left guessing. On site, it takes a few hours for most jobs. The room is left tidy and you will know when it can be used.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, normally overnight.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
Getting a price
To get a price, send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Advice
Glenluce: your questions answered
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Do you cover Glenluce?
Yes. We work across the UK and travel to Glenluce. Send photos and we’ll quote, or call 0345 017 0787.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
How much does non-slip bath coating cost in Glenluce?
Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your DG8 postcode.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Will there be a smell?
There may be a mild smell during the work.
About our accreditations · Every repair comes with a one-year guarantee.
