Liverpool · England
Non-slip bath & shower coating in Hale, Liverpool
Clear non-slip coatings for baths and shower trays for homes and businesses in Hale and across Liverpool. Free, fixed quotes from your photos.
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
About our non-slip bath coating in Hale
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. We work on enamelled baths, shower trays and wet room floors (ask us), and common reasons people contact us are bath mats that harbour mould or get forgotten and safety for older or less mobile people.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Area
- Hale (L24)
- Region
- Liverpool
- Cover
- 12 months on all our work
- Price
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a few hours. If anything looks different from your pictures, we will talk to you before going ahead.
- We clean and degrease the standing area.
- Next we mask off the area.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
Get a quote
If you are in Hale and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Where we work around Hale
Hale is about 4 miles south-west of Widnes, in Liverpool. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Hale is one of 52 towns and villages in Liverpool we cover. Our nearest city page is Liverpool, about 7 miles away.
Our technicians cover all of the L24 postcode area. Streets in the area include High Street, Church Road and John Middleton Close, and we cover them all. Close by, we cover Hale Bank (1 mile north-east), Weston Point (2 miles south-east), Westfield (2 miles east), Ditton (2 miles north-east) and Ball o' Ditton (2 miles north-east). We also work in nearby towns such as Liverpool (7 miles north-west), Crosby (14 miles north-west), Everton (9 miles north-west), Orrell (12 miles north-west), Brighton-le-Sands (14 miles north-west) and Wavertree (7 miles north-west).
Near you in Hale
Typical jobs here are in homes near Halebank Park, The Wellington pub and Hale Church of England Voluntary Controlled Primary School. Other local landmarks include St Mary's Church (less than half a mile south) and Parklands High School (1.8 miles west). The nearest railway station is Halewood station, roughly 2.4 miles north-west of the centre. Further afield, we also cover the area around Catalyst Science Discovery Centre (2.8 miles east) and Frodsham Castle (4.1 miles south-east). Open spaces near Hale include Hale Duck Decoy.
Prices and what affects them
Every quote is fixed and free. What we take into account:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- A coin beside the damage so we can judge size
- Details of any past repairs
- One sharp close-up of the damage
- A wider photo showing the whole bath or shower tray
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job the same day in most cases.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Liverpool and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
More services for Hale
What we can’t put right
Honesty matters more than a booking, so here’s what a repair will not do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Enamelled baths
- Shower trays
When to call us in Hale
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
If you can see any of these, send us a photo:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Worn-out textured areas
What to look for in a quote
- If travel is included in the price
- Whether the colour is mixed to match
- When it can be used again
- Aftercare advice
Hale: your questions answered
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
How do I get a price for non-slip bath coating in Hale?
We give a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Will a non-slip coating change how my bath looks?
Only slightly: the treated area looks slightly matt.
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
Why us?
- Repair technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
- We’ll tell you if it’s not worth repairing
- Most jobs done in one visit
Read our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
