Wiltshire · England
Non-slip bath & shower coating in Ham, Wiltshire
Non-slip bath coating for Ham, without a refit. Send us photos for a fixed quote, then we come to you.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
Non-slip bath coating in Ham, done in place
It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Typical jobs include resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, on enamelled baths, resurfaced baths and acrylic baths.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Ham (SN8)
- Region
- Wiltshire
- Cover
- A year, on every repair
- Quote
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need non-slip bath coating in Ham
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Most people get in touch after spotting something like this:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
Questions to ask before booking
- What the guarantee covers, and for how long
- A fixed quote, and whether VAT is included
- When it can be used again
- What happens if the damage is worse than the photos show
Ham and nearby
Ham is about 9 miles west of Newbury, in Wiltshire. Wherever you are in the SN8 postcode area, we carry out the work at your property. Ham is one of 425 towns and villages in Wiltshire we cover. Our jobs stretch from Ham to London (62 miles away).
We cover every part of the SN8 postcode area and the streets around it. Local streets include Church Road, Ham Road and Spray Road. If you’re just outside Ham, we cover Shalbourne (1 mile west), Rivar (1 mile south-west), Buttermere (1 mile south-east), Bagshot (1 mile north-west) and Little Bedwyn (3 miles north-west). Further out, we also cover Marlborough (9 miles north-west), Bulford (15 miles south-west), Pewsey (10 miles west), Aldbourne (9 miles north-west), Burbage (6 miles west) and Ramsbury (6 miles north-west).
Local landmarks in Ham
Our customers here include homes close to Crown and Anchor pub, Shalbourne CofE Primary School and Church of All Saints, among other places. For rail, the closest station is Bedwyn station, about 3.2 miles west of the centre. Nearby you will also find Bedwyn Stone Museum (3.4 miles west). For a walk, there’s Inkpen Hill and Kintbury Newt Ponds.
Common questions in Ham
What information do you need?
Send photos through the quote form or call 0345 017 0787.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Are there extra charges for Ham?
There’s no separate call-out charge. Your fixed quote includes everything.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Do you work in Ham?
We do. Technicians travel to Ham from across the region, with no extra charge for travel.
Prices and what affects them
Prices are worked out job by job, from your pictures. The main factors are:
- Previous DIY repairs that have to come out
- The material and finish
- Doing more than one item at once
- How hard the colour is to match
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- A wider photo showing the whole bath or shower tray
- Whether it’s been repaired or coated before
- Natural light rather than flash
- What it’s made of, if you know
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Repair or replace in Ham?
The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Why book with us
- Same prices wherever you are
- Rooms protected and left tidy
- A year’s guarantee on all work
- CHAS and Constructionline accredited
See our pricing.
What a repair cannot fix
We will not take on work that won’t last, so here’s what a repair can’t put right:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly.
Materials we repair
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Acrylic baths
- Resurfaced baths
How it works
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a few hours in most cases. We leave the room clean and ready to use once it has cured.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Make sure the room can be ventilated
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
If you manage property in Ham, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Towns and villages near Ham
Also in Ham
About our accreditations · Every repair comes with a one-year guarantee.
