Shropshire · England

Non-Slip Bath Coating in Harmer Hill

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Harmer Hill. Free, fixed quotes from your pictures.

  • Safety for older or less mobile people
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Harmer Hill homes

When a repair is not the answer

Some jobs aren’t right for a repair, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer.

Surfaces we repair

  • Enamelled baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Resurfaced baths
  • Shower trays

How we handle non-slip bath coating in Harmer Hill

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Our technicians work on wet room floors (ask us), shower trays and enamelled baths, and people most frequently call us about worn-out textured areas and a bath or tray that is slippery when wet.

Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Location
Harmer Hill (SY4)
County
Shropshire
Warranty
A year, on every repair
Quotes
Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

FAQs for Harmer Hill

How do I get a price for non-slip bath coating in Harmer Hill?

Because every job differs, we price from photos. You will get a fixed figure before you book.

What information do you need?

Use the quote form or ring 0345 017 0787, and we will take it from there.

Are there extra charges for Harmer Hill?

Travel is included in the price, and we charge the same wherever you are.

Is it worth repairing rather than replacing?

Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

What happens after I send pictures?

You will get a fixed quote back, plus dates. You are under no obligation.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

Harmer Hill and nearby

Harmer Hill is about 6 miles north of Shrewsbury, in Shropshire. Anywhere in SY4, a technician comes to you. Harmer Hill is one of 433 places in Shropshire we cover. You can also see our page for Birmingham, about 43 miles away.

All of SY4 is covered, from the main roads to the quietest streets. From The Hollow, Wem Road and Bridgewater Place or anywhere nearby, a technician can come to you. Nearby, we also work in Yorton Heath (1 mile east), Sansaw Heath (1 mile east), Haston (1 mile south-east), Preston Gubbals (2 miles south) and Bomere Heath (2 miles south-west). Larger places within reach include Shrewsbury (6 miles south), Oswestry (13 miles west), Market Drayton (13 miles north-east), Coleham (6 miles south), Kingsland (6 miles south) and Whitchurch (12 miles north).

Around Harmer Hill

Around Harmer Hill, we work in homes near Church of St Mary and The Red Castle pub and the streets around them. The closest station to Harmer Hill is Yorton station, about 1.2 miles north-east of the centre. Other landmarks nearby include Myddle Castle (1.6 miles north-west).

Map of Harmer Hill © OpenStreetMap contributors

Should you replace it?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • Fixed prices from your pictures
  • CHAS and Constructionline accredited
  • Honest advice, even when it means no job
  • One visit for most repairs

Take a look at our pricing.

What we do, step by step

We begin by going over the job with you. After that, protection goes down around the work area and the work begins. You can expect it to take a few hours, and we’ll tell you if anything changes.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

Before we arrive

  • Move bottles, mats and clutter away from the area
  • Let us know about parking or access
  • Point us to the nearest place to park

Get a quote

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a free quote

Advice

Landlords, agents and businesses in Harmer Hill

We carry out planned and one-off repairs for housing associations and facilities teams in Shropshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

What non-slip bath coating costs

There are no hourly rates or hidden extras. The price is based on:

  • Where the damage is and how we get to it
  • Doing more than one item at once
  • What kind of damage it is
  • How hard the colour is to match

The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

How to get a fixed price

Before you send pictures, these tips help us give you a firm price:

  • A close-up of the damage, in focus
  • Your postcode, so we can check dates
  • What it’s made of, if you know
  • A picture taken from further back

Most clients in Harmer Hill get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

What we are called out for in Harmer Hill

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Contact us if you’ve noticed:

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth

Before you book anyone

  • Whether they match the colour on site
  • The length of the guarantee and what it covers
  • What happens if the damage is worse than the pictures show
  • If travel is included in the price

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.