Cumbria · England

Non-Slip Bath Coating in Haverigg

Non-slip bath coating in Haverigg without the cost of replacing. Get a fixed quote from your pictures, then we come to you.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Haverigg?

How we handle non-slip bath coating in Haverigg

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. Common call-outs are for a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, on wet room floors (ask us), enamelled baths and shower trays.

We stand behind the work with a one-year guarantee, so you are covered after the visit. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Where
Haverigg (LA18)
Area hub
Cumbria
Guarantee
One year on every repair
Price
Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

What we do, step by step

We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes a morning or an afternoon.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, normally overnight.

Getting ready for the visit

  • Let us know which floor the room is on
  • Avoid using the area for a few hours before we arrive
  • Ensure the room can be ventilated

Get a quote

For a price in Haverigg, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Read more

Landlords, agents and businesses in Haverigg

Housing associations and facilities teams use us for planned and reactive repairs in Cumbria and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

Prices and what affects them

You will not pay by the hour. The price is based on:

  • Access to the area
  • Doing more than one item at once
  • The material
  • How many areas need work

Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

You can generally get a fixed price without us visiting. To make it quick:

  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates
  • Any details about the material
  • One picture of the whole bath or shower tray

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.

What we’re called out for in Haverigg

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Typical reasons for a call-out include:

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten

Questions to ask before booking

  • How changes to the job are handled
  • Whether the price covers travel
  • What preparation is included
  • Is the price fixed, and does it include VAT?

10 questions to ask before booking

What we can’t put right

We’d rather lose a job than do one that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly before booking.

Materials we repair

  • Enamelled baths
  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths

Haverigg questions

Is there a call-out fee?

We do not add a call-out fee. The fixed quote covers the visit and the work.

Can you do more than one item on the same visit?

Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you will get one combined price.

What does non-slip bath coating cost?

Because every job differs, we price from pictures. You will get a fixed figure before booking.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can I get a quote without a visit?

Generally, yes. Clear photos let us give you a fixed price without visiting.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

What areas do you cover?

We work UK-wide. Prices don’t change with location.

Should you replace it?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Our prices are the same across the UK, so there is no premium for Haverigg. The job itself decides the price: the material, the amount of damage and how many items.

Why Haverigg clients choose us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Straight answers about what a repair can do
  • We leave the room as we found it
  • A fixed quote before booking

See our prices page.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

About Haverigg

Haverigg is about 6 miles north-west of Barrow-in-Furness, in Cumbria. Customers in Haverigg get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. We work in 438 places in Cumbria. Our nearest city page is Liverpool, about 57 miles away.

Here we cover the LA18 postcode area. Jobs here include addresses on Main Street, Town Head and Atkinson Street and the roads around them. Close by, we cover Askam in Furness (3 miles east), Ormsgill (5 miles south-east), Hawcoat (5 miles south-east), North Scale (6 miles south) and Hindpool (6 miles south-east). Within a short drive, we also cover Barrow-in-Furness (6 miles south-east), Ulverston (8 miles east), Salthouse (7 miles south-east), Dalton-in-Furness (5 miles south-east), Risedale (7 miles south-east) and Vickerstown (7 miles south).

Near you in Haverigg

Around Haverigg, we work in homes near Haverigg Primary School, St Luke and Millom School, among other places. The closest station to Haverigg is Millom station, about 1.2 miles north-east of the centre. Further afield, we also cover the area around Millom Castle (1.7 miles north-east) and Millom Hospital (1.1 miles north-east). The countryside around Haverigg includes Hodbarrow Nature Reserve.

Map of Haverigg © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.