Somerset · England
Non-Slip Bath Coating for Hillcommon homes
Non-slip bath coating for Hillcommon, without a refit. Send us photos for a fixed quote, then we come to you.
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Non-slip bath coating at your home in Hillcommon
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Our technicians work on enamelled baths, acrylic baths and wet room floors (ask us), and common reasons people contact us are bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Hillcommon (TA4)
- Region
- Somerset
- Guarantee
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Hillcommon and the surrounding area
Hillcommon is about 3 miles north of Wellington, in Somerset. Across the TA4 area, a technician comes to you. We cover all 640 towns and villages in Somerset.
Here we cover the TA4 postcode area. Close by, we cover Oake (1 mile south-east), Milverton (2 miles west), Nynehead (2 miles south), Ash Priors (2 miles north) and Fitzhead (2 miles north-west). We also work in nearby towns such as Taunton (5 miles east), Bridgwater (12 miles north-east), Chard (15 miles south-east), Wellington (3 miles south), Sydenham (12 miles north-east) and Wilton (5 miles east).
Local landmarks in Hillcommon
We visit homes around Church of St Bartholomew, Oake and The Royal Oak pub. Hillcommon’s nearest station is Taunton station, about 4.9 miles east of the centre. Well-known places in the area include Merrifield Children's Unit (1.4 miles north-east) and Taunton Castle (4.5 miles east). Green spaces nearby include Knowle Hill.
Also near Hillcommon
What else we do in Hillcommon
Common problems we fix in Hillcommon
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
You may need us if you’ve spotted:
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
Questions to ask before booking
- Whether they match the colour on site
- How to care for the finish
- What preparation is included
- Is the price fixed, and does it include VAT?
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take a morning or an afternoon, tidy-up included.
- We start by degreasing the area where you stand.
- Next we mask off the area.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- We leave it to cure, generally overnight.
How to prepare
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
- Open a window if you can
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
Landlords, agents and businesses in Hillcommon
If you manage property in Hillcommon, we will quote for several properties at once. Send photos for each one and we will price them together.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Your questions about non-slip bath coating in Hillcommon
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
Do you cover the entire of Somerset?
Everywhere in the UK, Hillcommon included. There’s no extra charge for travel.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Repair or replace: which is better?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with nothing added on the day.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- No need to remove anything
- A fixed quote before you book
See our prices page.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What a repair cannot fix
Some jobs are not right for a repair, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Acrylic baths
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
Prices and what affects them
There’s no charge for travel to Hillcommon. The price depends on:
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
- Access to the area
- The material and finish
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- The material, if you know it
- Details of any past repairs
- Something in shot to show the size
- A wider photo showing the entire bath or shower tray
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
