Somerset · England
Bath re-enamelling & resurfacing in Hillcommon, Somerset
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Hillcommon. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A dull, rough surface that won’t come clean
Bath re-enamelling in Hillcommon without replacing anything
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Whether it’s an old resurfacing that’s failing and a coloured bath you want in white, we can normally put it right.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Hillcommon (TA4)
- County
- Somerset
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Hillcommon
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
How long is the bath unusable?
Usually one day, with the bath ready the following day. A badly pitted bath can need a second day.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is a repair better than a new one?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Looking after it afterwards
Aftercare is simple:
- A quick wipe after use keeps limescale away
- Never use suction bath mats
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Covering Hillcommon
Hillcommon is about 3 miles north of Wellington, in Somerset. Wherever you are in the TA4 postcode area, we carry out the work at your property. We work in 640 places across Somerset, from the larger towns to small villages.
Our visits in TA4 work the same way as everywhere else we cover. Nearby, we also work in Oake (1 mile south-east), Milverton (2 miles west), Nynehead (2 miles south), Ash Priors (2 miles north) and Fitzhead (2 miles north-west). Within a short drive, we also cover Taunton (5 miles east), Bridgwater (12 miles north-east), Chard (15 miles south-east), Wellington (3 miles south), Sydenham (12 miles north-east) and Wilton (5 miles east).
What’s near Hillcommon
Typical jobs here are in homes near Church of St Bartholomew, Oake and The Royal Oak pub and the streets around them. The closest station to Hillcommon is Taunton station, about 4.9 miles east of the centre. A little further out are Merrifield Children's Unit (1.4 miles north-east) and Taunton Castle (4.5 miles east). For a walk, there’s Knowle Hill.
Places near Hillcommon
Also in Hillcommon
Common problems we fix in Hillcommon
Frequently the bath has just had decades of use. The body of the bath is normally perfectly sound.
Clients usually contact us about:
- Stains that won’t shift
- A coating lifting around the plughole
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
Questions to ask before you book
- What protection goes down before work starts
- Whether there are any call-out or travel charges
- How long it needs to cure
- How changes to the job are handled
Should you replace it?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing typically wins. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
What you get with us
- Same prices wherever you are
- Nothing taken out or refitted
- Work done at your home or business
- CHAS and Constructionline accredited
Take a look at our pricing and guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Hillcommon. What changes the price is:
- The colour and finish to match
- What kind of damage it is
- Whether we combine several jobs
- What the surface is made of
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
Almost every job we do is priced from pictures. This is what we need:
- Details of any past repairs
- Natural light rather than flash
- A close-up of the damage, in focus
- What it’s made of, if you know
Most customers in Hillcommon get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
What a repair can’t fix
Some jobs aren’t right for a repair, for example:
- Leaking taps or wastes (a plumber’s job)
- A bath that’s rusted through
- A bath split right through the body
Send us pictures and we’ll tell you honestly before you book.
What we work on
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
How the visit works
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. You can expect it to take most of the day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Let us know which floor the room is on
- Keep a parking space free if you can
- Ensure the room can be ventilated
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
