Argyll and Bute · Scotland
Non-Slip Bath Coating in Hunters Quay
Non-slip bath coating across Hunters Quay and nearby, typically in one visit and guaranteed for a year.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Non-slip bath coating in Hunters Quay, done in place
The coating is clear and textured, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. We are often asked to fix resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, in enamelled baths, wet room floors (ask us) and resurfaced baths.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Hunters Quay (PA23)
- County
- Argyll and Bute
- Warranty
- A year, on every repair
- Quote
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
It helps to know what we can’t do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Acrylic baths
- Resurfaced baths
- Shower trays
- Enamelled baths
- Wet room floors (ask us)
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before you book.
Why us?
- Repair technicians who travel to you, UK-wide
- CHAS and Constructionline accredited
- Rooms protected and left tidy
- Usually one visit, start to finish
Take a look at our prices page.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
FAQs for Hunters Quay
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
What areas do you cover?
Everywhere in the UK, Hunters Quay included. Travel is included in the price.
How do I clean it?
Yes. Use a soft brush and a mild cleaner.
How do I get a price for non-slip bath coating in Hunters Quay?
Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Do you cover Hunters Quay?
Yes, we do. Technicians travel to Hunters Quay from across the region, with no extra charge for travel.
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, and we finish with a tidy-up and a look at the finished work together.
- We clean and degrease the standing area.
- Next we mask off the area.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, normally overnight.
How to prepare
- Let us know if it has been repaired before
- Ensure the area is dry
- Open a window if you can
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
Also in Hunters Quay
Landlords, agents and businesses in Hunters Quay
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What we’re called out for in Hunters Quay
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
If you can see any of these, send us a picture:
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
What to look for in a quote
- Whether a trained technician does the job
- How soon you can use it again
- What aftercare is recommended
- What happens if the damage is worse than the photos show
What non-slip bath coating costs
You’ll know the full cost before booking. We look at:
- Where the damage is and how we get to it
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- How much damage there is
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send photos for a quote
We price nearly every job from pictures. This is what we need:
- A wider photo showing the whole bath or shower tray
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed quote the same day in most cases.
About Hunters Quay
Hunters Quay is about 3 miles west of Gourock, in Argyll and Bute. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Hunters Quay is one of 118 towns and villages in Argyll and Bute where we work. We work right across the region, from Hunters Quay to Glasgow (25 miles away).
Every address in PA23 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Kirn (1 mile south-west), Dunoon (1 mile south-west), Strone (1 mile north), Sandbank (2 miles north-west) and Kilmun (3 miles north-west). We also work in nearby towns such as Helensburgh (7 miles east), Rothesay (11 miles south-west), Rhu (6 miles north-east), Garelochhead (9 miles north), Port Bannatyne (10 miles south-west) and Innellan (6 miles south-west). If you are somewhere remote, ring us first and we will plan the trip.
Around Hunters Quay
We visit homes around Kirn Primary School, Dunoon Grammar School and Kirn Church, among other places. The closest station to Hunters Quay is Gourock station, roughly 3.3 miles east of the centre. Other landmarks nearby include Dunoon Castle (1.7 miles south-west) and Cowal Community Hospital (1.2 miles south-west). Green spaces nearby include Loch Loskin and Lyle Hill.
About our accreditations · Every repair comes with a one-year guarantee.
