Highland · Scotland

Non-Slip Bath Coating in Janetstown

Our repair technicians come to Janetstown for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Janetstown

What we cannot put right

Not everything can be repaired, and we’ll tell you before we start. We can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly.

Materials we work on in Janetstown

  • Enamelled baths
  • Acrylic baths
  • Shower trays
  • Resurfaced baths
  • Wet room floors (ask us)

Non-slip bath coating in Janetstown, done in place

It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Common call-outs are for a bath or tray that is slippery when wet and safety for older or less mobile people, on acrylic baths, resurfaced baths and wet room floors (ask us).

All our work comes with our one-year guarantee. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Where
Janetstown (KW14)
County
Highland
Warranty
12 months on all our work
Quotes
Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026

Common problems we fix in Janetstown

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Keep an eye out for these signs:

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth

What your quote should include

  • How long it needs to cure
  • Is the price fixed, and does it include VAT?
  • How your room will be protected
  • What aftercare is recommended

Our hiring checklist

Can I fix it myself?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Janetstown: your questions answered

How do I book?

Some pictures, your postcode and how to reach you. On the day, access to the room.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

What happens once I’ve sent pictures?

We review the pictures and send a fixed quote.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you redo someone else’s repair?

In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

How do I get a price for non-slip bath coating in Janetstown?

Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo with your KW14 postcode.

What affects the price in Janetstown

We price every job individually. The main factors are:

  • Any earlier repairs that need removing first
  • Unusual colours or finishes
  • What the surface is made of
  • How many areas need work

What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.

Getting a price from photos

Photographing the damage takes a minute, and it saves a visit. Please include:

  • A close-up of the damage, in focus
  • The postcode, so we can plan the visit
  • A picture taken from further back
  • Any details about the material

There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

How it works

Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a morning or an afternoon, and we leave the room as we found it.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Let the surface dry out before the visit
  • Let us know about parking or access

How to get a price

The quickest way to a price is to send two or three pictures using our quote form or ring us. We’ll say straight away if a repair is the right fix.

Get a free quote

Read more

Should you replace it?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.

Why choose Surface Doctor in Janetstown

  • Every repair guaranteed for a year
  • Honest advice, even when it means no job
  • Everything repaired in place
  • Normally one visit, start to finish

Take a look at our prices page.

Work for landlords and builders

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

Where we work around Janetstown

Janetstown is about 3 miles south-west of Thurso, in Highland. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Janetstown is one of 253 places in Highland we cover.

We work across KW14. Close by, we cover Glengolly (1 mile east), Westfield (2 miles south-west), Thurso (3 miles north-east), Scrabster (3 miles north) and Forss (3 miles north-west). If you’re somewhere remote, ring us first and we will plan the trip.

Around Janetstown

Around Janetstown, we work in homes near Thurso High School and the streets around them. Janetstown’s nearest station is Thurso station, roughly 2.4 miles north-east of the centre. A little further out are Dunbar Hospital (1.8 miles north-east) and Thurso Heritage Museum (2.7 miles north-east). The countryside around Janetstown includes Broubster Leans RSPB Reserve and Loch Calder.

Map of Janetstown © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.