Cumbria · England

Non-Slip Bath Coating in Keekle

Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Keekle. Send pictures for a free, fixed quote.

  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Keekle?

Repair or replace in Keekle?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.

What you get with us

  • Honest advice, even when it means no job
  • A year’s guarantee on all work
  • Free fixed quotes from pictures
  • Everything repaired in place

Take a look at our pricing.

How we handle non-slip bath coating in Keekle

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Whether it’s a bath or tray that is slippery when wet and safety for older or less mobile people, we can normally put it right.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Location
Keekle (CA25, CA28)
Area hub
Cumbria
Cover
One year on every repair
Quote
Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

The process

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, typically overnight.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Let the surface dry out before the visit
  • Keep pets and children out of the room while we work

How to get a price

Upload pictures of the damage and a wider shot of the whole item, and tell us you’re in Keekle, and we’ll reply with a fixed price.

Get a fixed price

Advice

When a repair is not the answer

Not everything can be repaired, and we’ll tell you before we start. We can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly.

What we work on

  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths
  • Shower trays
  • Acrylic baths

What affects the price in Keekle

Every quote is fixed and free. What we look at:

  • Whether we combine several jobs
  • How easy the damage is to reach
  • The material and finish
  • Previous DIY repairs that have to come out

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Quotes from your photos

Most quotes are done from pictures alone. To help us price it:

  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates
  • One picture of the entire bath or shower tray
  • Whether it’s been repaired or coated before

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

For landlords and businesses

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Keekle and nearby

Keekle is about 2 miles east of Whitehaven, in Cumbria. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Keekle is one of 438 places in Cumbria where we work.

Our visits in CA25 and CA28 work the same way as everywhere else we cover. You will find streets such as Ember Lane and Keekle Mount, all of which we cover. Other places close to Keekle include Galemire (1 mile south-west), Hensingham (1 mile west), Cleator Moor (1 mile south-east), Moor Row (1 mile south) and Rheda Park (1 mile east). Within a short drive, we also cover Workington (7 miles north), Maryport (12 miles north), Cockermouth (11 miles north-east), Moorclose (7 miles north), Egremont (3 miles south) and Seaton (9 miles north).

Around Keekle

We visit homes around Hensingham Community Primary School, Church of St John Evangelist and The Whitehaven Academy. The nearest railway station is Corkickle station, roughly 1.8 miles west. Well-known places in the area include Hayes Castle (3.9 miles north) and The Rum Story (2.3 miles north-west). Open spaces near Keekle include Clints Quarry.

Map of Keekle © OpenStreetMap contributors

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.

Keekle questions

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Will I see the coating?

Only slightly: the treated area looks slightly matt.

Is a repair better than a new one?

Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Will there be a smell?

It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

I’m a tenant. Can you help?

Of course. Ask your landlord first, and we can send them the quote if that helps.

What we’re called out for in Keekle

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Clients typically contact us about:

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth

Comparing quotes

  • Whether cleaning and preparation are in the price
  • Who turns up on the day
  • How to look after the finish
  • How long it needs to cure

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.