Cumbria · England

Non-Slip Bath Coating for Cleator Moor homes

Clear non-slip coatings for baths and shower trays at your home in Cleator Moor, with a one-year guarantee on every repair.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Cleator Moor

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Non-slip bath coating at your home in Cleator Moor

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Typical jobs include worn-out textured areas and safety for older or less mobile people, in shower trays, resurfaced baths and wet room floors (ask us).

Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Location
Cleator Moor (CA25, CA23)
County
Cumbria
Warranty
One year on every repair
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

When to call us in Cleator Moor

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Keep an eye out for these signs:

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

Before you book anyone

  • Whether cleaning and preparation are in the price
  • What happens if the damage is worse than the pictures show
  • How the colour is matched
  • How long it needs to cure

How to compare quotes

For landlords and businesses

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

About Cleator Moor

Cleator Moor is about 3 miles south-east of Whitehaven, in Cumbria. Across the CA25 area, we carry out the work at your property. Our technicians cover all 438 towns and villages across Cumbria, from the larger towns to small villages.

Our repair technicians cover all of CA25 and CA23 and the streets around it. Local streets include Market Street, Market Square and High Street, and we cover them all. Being close to the A5086 and B5294, Cleator Moor is easy for our repair technicians to reach. If you’re just outside Cleator Moor, we cover Cleator (1 mile south), Moor Row (1 mile south-west), Rheda Park (1 mile north), Galemire (1 mile west) and Keekle (1 mile north-west). Within a short drive, we also cover Workington (8 miles north), Whitehaven (3 miles north-west), Maryport (13 miles north), Cockermouth (12 miles north-east), Moorclose (8 miles north) and Bransty (4 miles north-west).

Landmarks near Cleator Moor

Around Cleator Moor, we work in homes near Church of St John Evangelist, Montreal CofE Primary School and The Whitehaven Academy and the streets around them. The closest station to Cleator Moor is Corkickle station, roughly 3 miles north-west of the centre. A little further out are West Cumberland Hospital (2 miles west) and Caernarvon Castle (4.8 miles south). For a walk, there is Clints Quarry.

Map of Cleator Moor © OpenStreetMap contributors

When a repair is not the answer

Some jobs aren’t right for a repair, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before you book.

Materials we repair

  • Shower trays
  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Acrylic baths

How we price non-slip bath coating

We charge the same across the UK, including Cleator Moor. What changes the price is:

  • How many items we do on one visit
  • Any earlier repairs that need removing first
  • Unusual colours or finishes
  • The size and number of damaged areas

Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Getting a price from photos

A couple of clear pictures is all it takes. Try to include:

  • Whether it’s been repaired or coated before
  • What it’s made of, if you know
  • A wider photo showing the entire bath or shower tray
  • The postcode, so we can plan the visit

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote.

Common questions in Cleator Moor

Can you price it without visiting?

Yes, almost always. Clear pictures let us give you a fixed price without visiting.

Is the work guaranteed?

Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.

Which areas do you work in?

Everywhere in the UK, Cleator Moor included. There’s no extra charge for travel.

Can tenants book a repair?

We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

Is a repair better than a new one?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

What we do, step by step

Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Have a window or extractor fan available
  • Move bottles, mats and clutter away from the area
  • Let us know about parking or access

Getting a price

You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Send photos for a quote

Advice

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why book with us

  • Straight answers about what a repair can do
  • Dust sheets down, tidy finish
  • CHAS and Constructionline accredited
  • Fixed prices from your pictures

Take a look at our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.