Calderdale · England
Non-slip bath & shower coating in Lee Mount, Calderdale
Non-slip bath coating in Lee Mount without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Non-slip bath coating in Lee Mount without replacing anything
It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Our technicians work on acrylic baths, wet room floors (ask us) and enamelled baths, and common reasons people contact us are worn-out textured areas and a bath or tray that is slippery when wet.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Lee Mount (HX3, HX1, HX2)
- Region
- Calderdale
- Cover
- 12 months on all our work
- Quotes
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Also in Lee Mount
The process
The work is clean and fairly quiet. We protect the area first, then the work takes a few hours. Before we leave, we explain how soon it can be used and how to care for it.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- We leave it to cure, normally overnight.
Before we arrive
- Make sure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Read more
About Lee Mount
Lee Mount is about 1 mile north of Halifax, in Calderdale. We travel to homes and businesses in Lee Mount, so you do not need to take anything anywhere. Lee Mount is one of 129 towns and villages in Calderdale where we work. You can also see our page for Leeds, about 14 miles away.
All of HX3, HX1 and HX2 is within our area. Streets in the area include Old Lane, Dyer Lane and Mill Lane, and we cover them all. Lee Mount is on the A629 and A647, which makes it straightforward to reach. Neighbouring places we cover include Akroydon (1 mile east), Boothtown (1 mile north-east), Pellon (1 mile south-west), Wheatley (1 mile west) and Ovenden (1 mile north). Within a short drive, we also cover Brighouse (4 miles south-east), Todmorden (9 miles west), Elland (3 miles south), Hebden Bridge (6 miles west), Sowerby Bridge (3 miles south-west) and Rastrick (4 miles south-east). As one of the bigger places in Calderdale, Lee Mount sees plenty of our work.
Near you in Lee Mount
Around Lee Mount, we work in homes near St George's Church, Lee Mount Primary School and The Ridings School. Nearby too are Harrison House (0.9 miles south-east), Halifax High At Wellesley Park (1 mile south-west), St Mary's Church (0.7 miles south) and Old Lane Inn (less than half a mile north-east). The nearest railway station is Halifax station, roughly 1.2 miles south-east. Other landmarks nearby include Crossley House (0.8 miles south) and Royal Halifax Infirmary (1.4 miles south).
- Other local spots include Shroggs Park (less than half a mile south-west) and Halifax Rural District (2.6 miles south-east)
When we would advise against a repair
We would rather lose a job than do one that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before booking.
Materials we repair
- Acrylic baths
- Enamelled baths
- Shower trays
- Resurfaced baths
- Wet room floors (ask us)
How we price non-slip bath coating
We charge the same across the UK, including Lee Mount. What changes the price is:
- The size and number of damaged areas
- How easy the damage is to reach
- What the surface is made of
- Whether old repairs or coatings need taking off
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.
Send pictures for a quote
When you take your photos, a few simple things make all the difference:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath or shower tray
- One sharp close-up of the damage
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Repairing versus replacing in Lee Mount
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Compared with replacing, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in Lee Mount
- Technicians who travel to you, UK-wide
- Straight answers about what a repair can do
- No need to remove anything
- A year’s guarantee on all work
Take a look at our prices page.
Lee Mount questions
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Do you work in Lee Mount?
Yes. We cover the entire UK and come to Lee Mount. Send pictures and we will quote, or call 0345 017 0787.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you need non-slip bath coating in Lee Mount?
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
It’s worth getting a quote if you see:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
Questions to ask before you book
- What protection goes down before work starts
- Whether the colour is mixed to match
- How long the guarantee is and what it covers
- What aftercare is recommended
About our accreditations · Every repair comes with a one-year guarantee.
