Herefordshire · England
Non-slip bath & shower coating in Little Tarrington, Herefordshire
Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Little Tarrington. Send photos for a free, fixed quote.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Covering Little Tarrington
Little Tarrington is about 7 miles east of Hereford, in Herefordshire. Jobs in Little Tarrington are booked in like any other job: a fixed quote from photos, then a visit to do the work. Little Tarrington is one of 255 towns and villages in Herefordshire where we work. We work right across the region, from Little Tarrington to Birmingham (about 39 miles away).
Postcode districts we cover here: HR1. If you are just outside Little Tarrington, we cover Tarrington (1 mile west), Durlow Common (1 mile south-east), Ashperton (1 mile east), Canon Frome (2 miles north-east) and Putley (2 miles south-east). We also work in nearby towns such as Hereford (7 miles west), Ross-on-Wye (10 miles south), Ledbury (5 miles east), Leominster (14 miles north-west), Redhill (8 miles west) and Newton Farm (8 miles west).
Near you in Little Tarrington
Our clients here include homes close to Church of St Phillip and St James, The Tarrington Arms Public House and Stoke Edith House, among other places. Nearby you will also find Ashperton Castle (1.1 miles east). Open spaces near Little Tarrington include Wessington Wood & Pasture.
Non-slip bath coating at your home in Little Tarrington
It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Whether it’s worn-out textured areas and resurfaced baths that are now too smooth, we can help, on shower trays, wet room floors (ask us) and resurfaced baths alike.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Area
- Little Tarrington (HR1)
- Region
- Herefordshire
- Guarantee
- A year, on every repair
- Price
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Why repair rather than replace?
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.
What you get with us
- We’ll tell you if it’s not worth repairing
- Same prices wherever you are
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
Read our prices page.
Your questions about non-slip bath coating in Little Tarrington
What areas do you cover?
We cover the entire UK, including Little Tarrington and the rest of Herefordshire. Send your postcode with your photos and we’ll confirm dates.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will a non-slip coating change how my bath looks?
Only slightly: it shows as a matt area where you stand.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What happens after I send pictures?
We come back with a fixed price, typically with dates to choose from. There is no obligation to book.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Can you price it without visiting?
Normally, yes. Clear pictures let us give you a fixed quote without visiting.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Also near Little Tarrington
Other services in Little Tarrington
Signs you need non-slip bath coating in Little Tarrington
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
What to look for in a quote
- What protection goes down before work starts
- How the colour is matched
- Aftercare advice
- Who turns up on the day
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Prices and what affects them
There are no hourly rates or hidden extras. The price is based on:
- Unusual colours or finishes
- Access to the area
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
Before you send pictures, a few simple things make all the difference:
- Any details about the material
- One picture of the whole bath or shower tray
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a few hours from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Clear the area around the damage
How to get a price
To get a price, send two or three photos using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
Work for landlords and builders
Landlords, letting agents and housing providers in Little Tarrington use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
What a repair can’t fix
A repair is not always the answer, and we would rather say so up front. We cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Shower trays
- Enamelled baths
- Resurfaced baths
- Wet room floors (ask us)
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
