Leicestershire · England

Non-slip bath & shower coating in Lowesby, Leicestershire

Non-slip bath coating in Lowesby without the cost of replacing. Get a fixed price from your pictures, then book a visit.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Lowesby

Non-slip bath coating at your home in Lowesby

It’s a clear, textured coating, so the bath looks much the same. It’s popular with older people, families and holiday lets. Our technicians work on acrylic baths, shower trays and resurfaced baths, and common reasons people get in touch are resurfaced baths that are now too smooth and worn-out textured areas.

Every repair comes with a one-year guarantee. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Where
Lowesby (LE7)
Area hub
Leicestershire
Cover
One year on every repair
Quotes
Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026

Lowesby: your questions answered

What happens after I send pictures?

We look at the photos and reply with a fixed quote and some dates. If we need another angle, we will ask.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Lowesby.

Can you quote from pictures?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

Which areas do you work in?

Across the UK, so Lowesby is covered. Our prices are the same everywhere.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

Is the work guaranteed?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Do you cover Lowesby?

Yes. We cover the entire UK and come to Lowesby. Send photos and we’ll quote, or call 0345 017 0787.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Covering Lowesby

Lowesby is about 7 miles east of Syston, in Leicestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 287 towns and villages across Leicestershire, from the larger towns to small villages. Our jobs stretch from Lowesby to Birmingham (43 miles away).

Every address in LE7 is within our area, from the main roads to the quietest streets. Close by, we cover Cold Newton (1 mile south-west), Twyford (2 miles north), Tilton on the Hill (2 miles south-east), Hungarton (2 miles west) and Thorpe Satchville (3 miles north). Larger places within reach include Loughborough (14 miles north-west), Wigston (9 miles south-west), Melton Mowbray (7 miles north), Syston (7 miles west), Shelthorpe (14 miles north-west) and Blaby (12 miles south-west).

What’s near Lowesby

Our customers here include homes close to Church of All Saints. Other landmarks nearby include Billesdon Rural District (3 miles south) and Sauvey Castle (4.1 miles east).

Map of Lowesby © OpenStreetMap contributors

How it works

We begin by going over the job with you. Next, we cover and mask everything nearby and the work begins. It normally takes a morning or an afternoon.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, generally overnight.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Tell us if there are stairs or a lift
  • Make sure the area is dry

Ask for a price

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.

Send photos for a quote

Advice

What we cannot put right

Not everything can be repaired, and we’ll tell you before we start. We cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly.

Materials we repair

  • Shower trays
  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)

Repair or replace in Lowesby?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

What you get with us

  • A fixed quote before you book
  • Generally one visit, start to finish
  • Same prices wherever you are
  • Dust sheets down, tidy finish

Read our prices page.

Do you need non-slip bath coating in Lowesby?

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

People usually call us when they notice one of these:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth

What to look for in a quote

  • If travel is included in the price
  • How long the guarantee is and what it covers
  • What preparation is included
  • Is the price fixed, and does it include VAT?

Choosing a repair company

Prices and what affects them

You will know the full cost before booking. We look at:

  • Unusual colours or finishes
  • The material and finish
  • What kind of damage it is
  • Any earlier repairs that need removing first

What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.

How to get a fixed price

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • The postcode, so we can plan the visit
  • A close-up of the damage, in focus
  • Something in shot to show the size
  • The material, if you know it

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Work for landlords and builders

If you manage property in Lowesby, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.

Landlords, letting agents and housing providers in Lowesby use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

DIY kit or professional repair?

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.