Telford and Wrekin · England
Non-Slip Bath Coating in Malinslee
Non-slip bath coating for Malinslee, without a refit. Get a fixed quote from your pictures, then we come to you.
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Resurfaced baths that are now too smooth
How we handle non-slip bath coating in Malinslee
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. We work on wet room floors (ask us), shower trays and enamelled baths, and the jobs we see most are bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Location
- Malinslee (TF4, TF3, TF7)
- Region
- Telford and Wrekin
- Cover
- One year on every repair
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Malinslee
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
- One visit for most repairs
- Straight answers about what a repair can do
Read our prices page.
When we’d advise against a repair
To be straight with you, there are a few things a repair will not fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think.
Materials we repair
- Shower trays
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Where we work around Malinslee
Malinslee is about 1 mile south of Telford, in Telford and Wrekin. Across the TF4 area, we come to you. We work in 79 places across Telford and Wrekin. You can also see our page for Birmingham, about 28 miles away.
Here we cover the TF4, TF3 and TF7 postcode area. Jobs here include addresses on Moor Road, Park Road and Bank Road and the roads around them. Other places close to Malinslee include Dawley (1 mile south-west), The Rock (1 mile north-west), Old Park (1 mile north), Newdale (1 mile north-west) and Randlay (1 mile south-east). Further out, we also cover Wellington (3 miles north-west), Newport (7 miles north-east), Leegomery (3 miles north-west), Dothill (4 miles north-west), Donnington Wood (3 miles north) and Trench (3 miles north).
Near you in Malinslee
Locally, our jobs take us to homes close to Church of St Leonard, Telford Town Park and Ring "O" Bells pub. Also close by are Old Park Primary School (within half a mile east) and The Telford Langley School (0.7 miles south-west). The nearest railway station is Telford Central station, about 0.9 miles north-east of the centre. Other landmarks nearby include Museum of The Post Office In The Community (3 miles south) and Telford Shopping Centre (0.6 miles north-east). Not far away are The Ercall.
What happens on the day
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow a morning or an afternoon, and we will tell you if anything changes.
- We clean and degrease the standing area.
- Next we mask off the area.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- We leave it to cure, generally overnight.
Preparing for the visit
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Other services in Malinslee
FAQs for Malinslee
What happens next?
You’ll get a fixed quote back, typically with dates to choose from. You’re under no obligation.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
What does non-slip bath coating cost?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
It’s been repaired before. Can you still fix it?
Yes, we often do. It can add a little time, which we include in the quote.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Do you need non-slip bath coating in Malinslee?
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Look out for these signs:
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
Before booking anyone
- How the colour is matched
- What preparation is included
- What happens if the damage is worse than the photos show
- Whether the price covers travel
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What affects the price in Malinslee
We charge the same across the UK, including Malinslee. The price reflects:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- The material
- How much damage there is
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- The material, if you know it
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- A photo taken from further back
To get a price, send a couple of photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
