Lancashire · England

Non-Slip Bath Coating for Matshead homes

Fixed-price non-slip bath coating in Matshead and the surrounding area, generally in one visit.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Matshead

Non-slip bath coating at your home in Matshead

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. If you’re dealing with a bath or tray that is slippery when wet and worn-out textured areas, we can usually put it right, whatever the material.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Where
Matshead (PR3)
Area hub
Lancashire
Warranty
One year on every repair
Price
Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think.

What we work on

  • Resurfaced baths
  • Shower trays
  • Wet room floors (ask us)
  • Enamelled baths
  • Acrylic baths

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why book with us

  • CHAS and Constructionline accredited
  • Everything repaired in place
  • A year’s guarantee on all work
  • Same prices wherever you are

Read our prices page.

What non-slip bath coating costs

We do not charge extra for travel to Matshead. The price comes down to:

  • Whether it’s a chip, crack, burn or wear
  • Access to the area
  • How many areas need work
  • Previous DIY repairs that have to come out

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

How to get a fixed quote

We price nearly every job from pictures. This is what we need:

  • A clear, close picture of the problem area
  • Daylight if possible, and no flash reflection
  • A coin or ruler next to the damage for scale
  • One picture of the whole bath or shower tray

The quickest way to a price is to send two or three photos using our quote form or ring us. We will tell you honestly whether it can be repaired.

Matshead questions

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

How do I get a price for non-slip bath coating in Matshead?

The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Will the price change on the day?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

Can landlords book you?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

Can pets and children be at home?

Just keep them out of the work area. We will tell you when the room can be used again.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can tenants book a repair?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

Can you price it without visiting?

Generally, yes. Clear photos let us give you a fixed quote without visiting.

Where we work around Matshead

Matshead is about 5 miles north of Fulwood, in Lancashire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Matshead is one of 482 places in Lancashire where we work. Our jobs stretch from Matshead to Liverpool (33 miles away).

All of PR3 is within our area, from the main roads to the quietest streets. Local streets include Lydiate Lane and Brock Side. Other places close to Matshead include Claughton (1 mile north), Bilsborrow (1 mile south-west), Stubbins (1 mile north-west), Myerscough (2 miles south-west) and Catterall (2 miles north-west). We also work in nearby towns such as Preston (7 miles south), Lancaster (13 miles north), Chorley (15 miles south), Lytham St Anne's (14 miles south-west), Bamber Bridge (10 miles south) and Morecambe (15 miles north).

Landmarks near Matshead

Around Matshead, we work in homes near Garstang Community Academy, St Mary's Catholic Primary School and Church of St Thomas. Nearby you’ll also find Greenhalgh Castle (2.9 miles north-west) and Royal Preston Hospital (5 miles south). Open spaces near Matshead include Beacon Fell.

Map of Matshead © OpenStreetMap contributors

Common problems we fix in Matshead

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Customers generally contact us about:

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

What to look for in a quote

  • What prep work is covered
  • Aftercare advice
  • Whether they match the colour on site
  • Who turns up on the day

Choosing a repair company

How the visit works

There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours, including clearing up.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

Before we arrive

  • Plan for the room to be out of bounds to pets and children
  • Move bottles, mats and clutter away from the area
  • Ensure the area is dry

Ask for a price

For a price in Matshead, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Related advice

Landlords, agents and businesses in Matshead

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.

If you manage property in Matshead, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.

Can I fix it myself?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.