Dorset · England
Non-Slip Bath Coating in Melcombe Bingham
Clear non-slip coatings for baths and shower trays in Melcombe Bingham, carried out at your home and guaranteed for a year.
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
How the visit works
Your technician turns up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, and we leave the room as we found it.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- The coating is left to cure before use, normally overnight.
How to prepare
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
- Keep pets and children out of the room while we work
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Related advice
How we handle non-slip bath coating in Melcombe Bingham
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Our technicians work on wet room floors (ask us), resurfaced baths and acrylic baths, and common reasons people get in touch are resurfaced baths that are now too smooth and worn-out textured areas.
Every job is backed for twelve months in Melcombe Bingham and everywhere else. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Where
- Melcombe Bingham (DT2)
- Area hub
- Dorset
- Guarantee
- One year on every repair
- Quote
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about non-slip bath coating in Melcombe Bingham
How do I book?
Photos of the damage, a picture of the whole bath or shower tray and your postcode. Then we’ll agree a date.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
How do I get a price for non-slip bath coating in Melcombe Bingham?
Every job gets a fixed price based on photos of the damage. Send a close-up and a photo of the entire item with your DT2 postcode.
Is there a guarantee?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can you price it without visiting?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
What we are called out for in Melcombe Bingham
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
The things customers normally mention when they call include:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Questions to ask before booking
- Whether cleaning and preparation are in the price
- How the colour is matched
- Whether the price is fixed and includes VAT
- How long the guarantee is and what it covers
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why choose Surface Doctor in Melcombe Bingham
- A fixed quote before you book
- Most jobs done in one visit
- Technicians who travel to you, UK-wide
- We leave the room as we found it
Read our pricing.
When a repair is not the answer
It helps to know what we cannot do too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
- Enamelled baths
- Resurfaced baths
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Towns and villages near Melcombe Bingham
Other services in Melcombe Bingham
Where we work around Melcombe Bingham
Melcombe Bingham is about 8 miles west of Blandford Forum, in Dorset. Wherever you are in the DT2 postcode area, a technician comes to you. Our technicians cover 462 places across Dorset, from the larger towns to small villages.
Our technicians cover all of the DT2 postcode area. Nearby, we also work in Ansty (1 mile north), Cross Lanes (1 mile south-west), Lower Ansty (1 mile north-east), Higher Ansty (1 mile north-east) and Little Ansty (1 mile north). Within a short drive, we also cover Weymouth (15 miles south), Dorchester (9 miles south-west), Blandford Forum (8 miles east), Gillingham (15 miles north), Shaftesbury (14 miles north-east) and Sherborne (12 miles north-west).
Landmarks near Melcombe Bingham
Around Melcombe Bingham, we work in homes near Milton Abbey School and Church of St Andrew, among other places. A little further out are Brewery Farm Museum (2.6 miles east). For a walk, there’s Lyscombe Hill.
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
What affects the price in Melcombe Bingham
There is no area surcharge for Melcombe Bingham. The price reflects:
- Doing more than one item at once
- The size and number of damaged areas
- What the surface is made of
- Previous DIY repairs that have to come out
We charge the same wherever you are, so there’s no premium for Melcombe Bingham. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your pictures
We price nearly every job from pictures. This is what we need:
- Something in shot to show the size
- Details of any past repairs
- The postcode, so we can plan the visit
- Any details about the material
Send us a photo of the damage and a wider shot of the entire item, with your DT2 postcode, and we will come back with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
