Aberdeenshire · Scotland

Non-Slip Bath Coating in Memsie

Our repair technicians come to Memsie for clear non-slip coatings for baths and shower trays. Nothing is taken out, with a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Memsie?

The process

We work cleanly and quietly. Protection goes down first, then the work takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Open a window if you can
  • Plan for the room to be out of bounds to pets and children
  • Point us to the nearest place to park

How to get a price

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Get a free quote

Advice

Non-slip bath coating in Memsie without replacing anything

It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. Whether it’s safety for older or less mobile people and worn-out textured areas, we can help, whatever the material.

Whatever the size of the job, you get the same one-year guarantee in Memsie and across Aberdeenshire. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Location
Memsie (AB43)
County
Aberdeenshire
Warranty
12 months on all our work
Quote
Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Memsie and the surrounding area

Memsie is about 3 miles south-west of Fraserburgh, in Aberdeenshire. Anywhere in AB43, we come to you. Our technicians cover 161 places in Aberdeenshire.

Our visits in AB43 work the same way as everywhere else we cover. Local streets include Cairn Close, Westcroft Close and Muir Road, all of which we cover. Neighbouring places we cover include Fraserburgh (3 miles north-east), Sandhaven (3 miles north), Broadsea (3 miles north), Pittulie (3 miles north) and Rosehearty (4 miles north-west). We also work in nearby towns such as Peterhead (14 miles south-east), Roanheads (14 miles south-east), Clerkhill (14 miles south-east), Port Henry (14 miles south-east), Mintlaw (9 miles south) and Longside (10 miles south-east).

Landmarks near Memsie

Nearby you will also find Fraserburgh Heritage Centre (3.4 miles north-east) and Fraserburgh Hospital (2.7 miles north-east). Not far away are Mormond Hill.

Map of Memsie © OpenStreetMap contributors

FAQs for Memsie

What happens if you find more damage?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

What happens next?

We review the photos and send a fixed quote.

Will I see the coating?

Only slightly: the treated area looks slightly matt.

Is the work guaranteed?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Can pets and children be at home?

Just keep them out of the work area. We will tell you when the room can be used again.

Do you need non-slip bath coating in Memsie?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

The most common problems we are called about are:

  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth

Before booking anyone

  • How soon you can use it again
  • The length of the guarantee and what it covers
  • A fixed price, and whether VAT is included
  • How your room will be protected

10 questions to ask before booking

When a repair isn’t the answer

Some problems need a builder, plumber or fitter rather than us:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly before booking.

Surfaces we repair

  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays
  • Enamelled baths
  • Acrylic baths

What non-slip bath coating costs

We charge the same across the UK, including Memsie. What changes the price is:

  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out
  • Whether we combine several jobs
  • The size and number of damaged areas

There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Send photos for a quote

We price nearly every job from pictures. This is what to send:

  • A coin or ruler next to the damage for scale
  • One picture of the entire bath or shower tray
  • Any details about the material
  • A clear, close picture of the problem area

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

Why Memsie clients choose us

  • A year’s guarantee on all work
  • Everything repaired in place
  • We come to you, anywhere in the UK
  • One price list for the whole UK

See our prices page.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.