Cornwall · England
Non-Slip Bath Coating for Merrymeet homes
Non-slip bath coating for Merrymeet, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
How we handle non-slip bath coating in Merrymeet
It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. We work on shower trays, wet room floors (ask us) and acrylic baths, and people most often call us about worn-out textured areas and resurfaced baths that are now too smooth.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Where
- Merrymeet (PL14)
- County
- Cornwall
- Warranty
- 12 months on all our work
- Quote
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Merrymeet
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
People normally call us when they notice one of these:
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Questions to ask before booking
- What protection goes down before work starts
- Whether the price covers travel
- What preparation is included
- A fixed price, and whether VAT is included
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
- Enamelled baths
- Shower trays
How we price non-slip bath coating
There’s no charge for travel to Merrymeet. The price comes down to:
- Whether old repairs or coatings need taking off
- What kind of damage it is
- Unusual colours or finishes
- The size and number of damaged areas
Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send pictures for a quote
You can take the pictures on your phone, there is no need for anything special. Ensure they show:
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
- The material, if you know it
- Good light, ideally daylight, without flash glare
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a morning or an afternoon. We tidy up before we leave and tell you when it’s ready to use.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, typically overnight.
Preparing for the visit
- Have a window or extractor fan available
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
Ask for a price
For a price in Merrymeet, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Covering Merrymeet
Merrymeet is about 2 miles north-east of Liskeard, in Cornwall. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Merrymeet is one of 644 places in Cornwall where we work.
We cover every part of the PL14 postcode area and the streets around it. From Trehawke Lane and Kingswood or a nearby road, we can come to you. We also travel to Hendrabridge (1 mile south-west), Trembraze (1 mile west), Addington (1 mile south-west), Liskeard (2 miles south-west) and Tremar (2 miles north-west). Further out, we also cover Stonehouse (13 miles south-east), Bodmin (13 miles west), Saltash (10 miles south-east), Launceston (12 miles north), Looe (8 miles south) and Torpoint (12 miles south-east).
What’s near Merrymeet
Locally, our jobs take us to homes close to Church of St Mary the Virgin and Liskeard School and Community College, among other places. The closest station to Merrymeet is Liskeard station, roughly 2.5 miles south-west of the centre. Nearby you’ll also find Caradon (2.1 miles south-west) and Liskeard and District Museum (2 miles south-west). Not far away are Caradon Hill.
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- One visit for most repairs
- Every repair guaranteed for a year
- One price list for the whole UK
Read our full price list.
Common questions in Merrymeet
What information do you need?
Photos of the damage, a picture of the entire bath or shower tray and your postcode. Then we will agree a date.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
How much does non-slip bath coating cost in Merrymeet?
Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
What areas do you cover?
Everywhere in the UK, Merrymeet included. Travel is included in the price.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Merrymeet as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
What else we do in Merrymeet
About our accreditations · Every repair comes with a one-year guarantee.
