Hampshire · England
Non-Slip Bath Coating in Milland
Local non-slip bath coating for Milland: photo quotes, tidy work and a year’s guarantee.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Worn-out textured areas
When we’d advise against a repair
We’d rather lose a job than do one that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Resurfaced baths
- Acrylic baths
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
Non-slip bath coating in Milland without replacing anything
It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. If you are dealing with resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, we can help.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Area
- Milland (GU30)
- Region
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
How we price non-slip bath coating
You won’t pay by the hour. The price depends on:
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Whether we combine several jobs
Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Try to send:
- The material, if you know it
- A clear, close picture of the problem area
- A picture taken from further back
- Good light, ideally daylight, without flash glare
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Work for landlords and builders
Landlords, letting agents and housing providers in Milland use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Covering Milland
Milland is about 6 miles east of Petersfield, in Hampshire. Anywhere in GU30, we come to you. Milland is one of 683 places in Hampshire where we work. We work right across the region, from Milland to London (44 miles away).
Every address in GU30 is within our area, from the main roads to the quietest streets. Local streets include Milland Lane, Mill Vale Meadows and Drakeleys Field, and we cover them all. Nearby, we also work in Trotton Marsh (1 mile south), Borden (2 miles south-west), Rake (2 miles west), Chithurst (2 miles south) and Rogate (3 miles south-west). Within a short drive, we also cover Havant (14 miles south-west), Horndean (13 miles south-west), Aldershot (15 miles north), Alton (11 miles north-west), Waterlooville (15 miles south-west) and Petersfield (6 miles west).
What’s near Milland
Typical jobs here are in homes near Hollycombe Primary School, The Rising Sun pub and Tuxlith Chapel and the streets around them. For rail, the closest station is Liphook station, roughly 2.4 miles north of the centre. Further afield, we also cover the area around Midhurst Community Hospital (4.3 miles south-east). Green spaces nearby include Wheeler's Down and Lynchmere Commons.
What we are called out for in Milland
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Keep an eye out for any of the following:
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
Before booking anyone
- Whether a trained technician does the job
- How soon you can use it again
- How to care for the finish
- How the colour is matched
Common questions in Milland
Can you quote from photos?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Is repairing better than replacing?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Do you charge for travel?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Hampshire.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Which areas do you work in?
We cover the whole UK, including Milland and the rest of Hampshire. Just include your postcode and we will offer you dates.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
What happens on the day
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. Allow a morning or an afternoon, and we will keep you posted as we go.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
Getting ready for the visit
- Make sure the area is dry
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
How to get a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
Related advice
Why repair rather than replace?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
Why Milland clients choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- We leave the room as we found it
- Every repair guaranteed for a year
Take a look at our pricing.
Nearby places to Milland
More services for Milland
About our accreditations · Every repair comes with a one-year guarantee.
