Hampshire · England
Bath Re-enamelling for Milland homes
Problem with your bath in Milland? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Worn patches where water runs and sits
Bath re-enamelling in Milland without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. Whether it’s an old resurfacing that’s failing and staining under the taps and around the waste, we can typically put it right.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Milland (GU30)
- Region
- Hampshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Milland
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Will there be a smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
What happens once I’ve sent pictures?
You’ll get a fixed quote back, generally with dates to choose from. There’s no obligation to book.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
How it works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a full day. Before we go, we’ll explain how long to leave it and how to care for it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Let us know which floor the room is on
Ask for a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We will say right away if a repair is the right fix.
Advice
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
Signs you need bath re-enamelling in Milland
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
If you can see any of these, send us a photo:
- A roll-top that’s seen better days
- A dull, rough surface that won’t come clean
- A peeling or bubbling previous coating
- Several chips and rust patches
Before you book anyone
- Whether they match the colour on site
- Who turns up on the day
- Whether cleaning and preparation are in the price
- What protection goes down before work starts
What affects the price in Milland
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- Doing more than one item at once
- The material
- How much damage there is
- Whether it’s a chip, crack, burn or wear
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Send pictures for a quote
Before you send pictures, a few simple things make all the difference:
- The material, if you know it
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- Something in shot to show the size
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
For landlords and businesses
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
About Milland
Milland is about 6 miles east of Petersfield, in Hampshire. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. We cover all 683 towns and villages in Hampshire. Our jobs stretch from Milland to London (about 44 miles away).
All of GU30 is covered. Streets in the area include Milland Lane, Mill Vale Meadows and Drakeleys Field. Other places close to Milland include Trotton Marsh (1 mile south), Borden (2 miles south-west), Rake (2 miles west), Chithurst (2 miles south) and Rogate (3 miles south-west). Further out, we also cover Havant (14 miles south-west), Horndean (13 miles south-west), Aldershot (15 miles north), Alton (11 miles north-west), Waterlooville (15 miles south-west) and Petersfield (6 miles west).
Around Milland
Locally, our jobs take us to homes close to Hollycombe Primary School, The Rising Sun pub and Tuxlith Chapel. The closest station to Milland is Liphook station, roughly 2.4 miles north. Other landmarks nearby include Midhurst Community Hospital (4.3 miles south-east). The countryside around Milland includes Wheeler's Down and Lynchmere Commons.
Looking after it afterwards
To keep it looking its best:
- Have chips seen to early
- Fix dripping taps quickly
- Never use suction bath mats
- Dry the bath after use to stop limescale
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Also near Milland
Other services in Milland
When we would advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- A bath split right through the body
- Leaks from fittings rather than the bath
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
