Hampshire · England
Bath Resealing in Milland
Bath, shower and sink resealing with new mould-resistant silicone in Milland, carried out at your home and guaranteed for a year.
- Stained silicone
- Unsealed corners
- A messy previous reseal
How we handle bath resealing in Milland
Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. If you are dealing with a messy previous reseal and sealant that’s split or lifting, we can generally put it right, on basins & vanity units, baths and wet rooms alike.
Whatever the size of the job, it’s backed by a one-year guarantee in Milland and across Hampshire.
- Location
- Milland (GU30)
- Area hub
- Hampshire
- Cover
- A year, on every repair
- Quotes
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Is resealing worth it?
Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Milland
- Generally one visit, start to finish
- Free fixed quotes from pictures
- One price list for the entire UK
- No need to remove anything
See our pricing.
What we do, step by step
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes around two hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- We clean, treat and dry the joint.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Let us know if it has been repaired before
- Make sure the room can be ventilated
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
Nearby places to Milland
Other services in Milland
Questions from Milland
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How much does bath resealing cost in Milland?
Every job gets a fixed quote from your photos. Send a close-up and a picture of the entire item and your postcode.
Are there extra charges for Milland?
Travel is included in the price, with the same prices everywhere we work.
How long will it take?
Typically a couple of hours, then it needs to cure.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is repairing better than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Hampshire.
Materials and what they mean for the repair
Shower trays
Trays are sealed with weight on them, for the same reason.
Baths
Baths are resealed with water in them, to open the joint fully.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Milland and the surrounding area
Milland is about 6 miles east of Petersfield, in Hampshire. We travel to homes and businesses in Milland and nearby villages, so you do not need to take anything anywhere. Milland is one of 683 towns and villages in Hampshire where we work. Our nearest city page is London, about 44 miles away.
We work across GU30. Streets in the area include Milland Lane, Mill Vale Meadows and Drakeleys Field, all of which we cover. Close by, we cover Trotton Marsh (1 mile south), Borden (2 miles south-west), Rake (2 miles west), Chithurst (2 miles south) and Rogate (3 miles south-west). We also work in nearby towns such as Havant (14 miles south-west), Horndean (13 miles south-west), Aldershot (15 miles north), Alton (11 miles north-west), Waterlooville (15 miles south-west) and Petersfield (6 miles west).
What’s near Milland
Our customers here include homes close to Hollycombe Primary School, The Rising Sun pub and Tuxlith Chapel and the streets around them. Milland’s nearest station is Liphook station, roughly 2.4 miles north. Well-known places in the area include Midhurst Community Hospital (4.3 miles south-east). Not far away are Wheeler's Down and Lynchmere Commons.
Prices and what affects them
There are no hourly rates or hidden extras. The price is based on:
- Unusual colours or finishes
- The size and number of damaged areas
- How easy the damage is to reach
- How many items we do on one visit
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- One picture of the entire bath or shower
- The material, if you know it
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Replace the seal when mould sets in
- Keep bottles off the joints
- Open a window after bathing
- Give the seal a regular clean
Run the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Black mould in sealant isn’t just unsightly, it’s a sign moisture is sitting in the joint. An early reseal keeps water where it belongs.
What we can’t put right
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Tiles that move, until they’re refixed
- A bath or tray that moves, until its support is fixed
- Very wide gaps that need a trim
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Kitchen worktops & sinks
- Wet rooms
Common problems we fix in Milland
A bathroom without good ventilation is hard on sealant: damp hangs around, and mould takes hold.
The things clients generally mention when they call include:
- An untidy old seal
- Old sealant that looks dirty
- Black mould in the sealant
- Silicone coming away from the tiles
What your quote should include
- If travel is included in the price
- Whether the colour is mixed to match
- When it can be used again
- What aftercare is recommended
About our accreditations · Every repair comes with a one-year guarantee.
