Herefordshire · England

Non-Slip Bath Coating for Moorcot homes

Our technicians come to Moorcot for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Moorcot

How we handle non-slip bath coating in Moorcot

It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. If you are dealing with resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, we can help.

Whatever the size of the job, you get the same one-year guarantee in Moorcot and across Herefordshire. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Area
Moorcot (HR5)
County
Herefordshire
Cover
One year on every repair
Price
Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026

The process

Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours. Before we go, we’ll explain when it can be used and how to look after it.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, normally overnight.

Before we arrive

  • Keep pets and children out of the room while we work
  • Make sure the area is dry
  • Let us know which floor the room is on

Getting a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can give you a fixed price.

Get a free quote

Advice

Repair or replace in Moorcot?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Why Moorcot customers choose us

  • We come to you, anywhere in the UK
  • A year’s guarantee on all work
  • We will tell you if it’s not worth repairing
  • A fixed quote before you book

See our pricing.

Questions from Moorcot

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

Do the materials smell?

There can be some smell while we work. It fades as everything cures.

How do I get a price for non-slip bath coating in Moorcot?

Because every job differs, we price from photos. You know the full cost before anything is booked.

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

Will I see the coating?

Only slightly: the treated area looks slightly matt.

Which areas do you work in?

Everywhere in the UK, Moorcot included. There is no extra charge for travel.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children.

Landlords, agents and businesses in Moorcot

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

For anyone letting property in or around Moorcot, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.

When we would advise against a repair

We won’t take on work that won’t last, so here’s what a repair can’t put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Shower trays
  • Resurfaced baths
  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)

When to call us in Moorcot

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

If you can see any of these, send us a picture:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Before booking anyone

  • What happens if the damage is worse than the photos show
  • Who turns up on the day
  • Aftercare advice
  • How the colour is matched

Our hiring checklist

What affects the price in Moorcot

You will know the full cost before booking. We take into account:

  • How much damage there is
  • Any earlier repairs that need removing first
  • Where the damage is and how we get to it
  • The colour and finish to match

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Quotes from your pictures

Almost every job we do is priced from pictures. This is what we need:

  • A wider photo showing the whole bath or shower tray
  • Something in shot to show the size
  • Good light, ideally daylight, without flash glare
  • A clear, close picture of the problem area

Most customers in Moorcot get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

DIY repairs versus a professional job

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

About Moorcot

Moorcot is about 14 miles north-west of Hereford, in Herefordshire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Moorcot is one of 255 places in Herefordshire we cover. Our nearest city page is Birmingham, about 48 miles away.

Our visits in HR5 are booked in the same way as anywhere else. We also travel to Woonton Ash (1 mile south-west), Lower Broxwood (1 mile south), Holme Marsh (1 mile south-west), Lyonshall (1 mile west) and Woonton (2 miles south). We also work in nearby towns such as Hereford (14 miles south-east), Leominster (9 miles east), Redhill (14 miles south-east), Newton Farm (14 miles south-east), Whitecross (13 miles south-east) and Eign Hill (14 miles south-east).

Landmarks near Moorcot

In Moorcot, that means homes near St Mary's Church. Nearby you will also find Lyonshall Castle (1.6 miles west) and Kington Museum and History Centre (3.8 miles west). Green spaces nearby include Rushock Hill and Titley Pool.

Map of Moorcot © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.