Shropshire · England
Non-slip bath & shower coating in Moreton Mill, Shropshire
Fixed-price non-slip bath coating in Moreton Mill and the surrounding area, usually in one visit and guaranteed for a year.
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
Moreton Mill: your questions answered
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
What happens after I send pictures?
You will get a fixed quote back. You are under no obligation.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
About our non-slip bath coating in Moreton Mill
The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Whether it’s bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, we can help, on resurfaced baths, enamelled baths and wet room floors (ask us) alike.
Big or small, you get the same one-year guarantee in Moreton Mill and across Shropshire. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Location
- Moreton Mill (SY4)
- Area hub
- Shropshire
- Guarantee
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in Moreton Mill
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Typical reasons for a call-out include:
- Safety for older or less mobile people
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Questions to ask before you book
- What happens if they find more damage
- Whether a trained technician does the job
- What the guarantee covers, and for how long
- What protection goes down before work starts
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Where we work around Moreton Mill
Moreton Mill is about 8 miles north-east of Shrewsbury, in Shropshire. Jobs in Moreton Mill are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We cover all 433 towns and villages in Shropshire, from the larger towns to small villages. We work right across the region, from Moreton Mill to Birmingham (38 miles away).
All of SY4 is within our area. Nearby, we also work in Edgebolton (1 mile south), Shawbury (1 mile south-west), Walton (3 miles south-east), High Ercall (3 miles south) and Astley (4 miles south-west). We also work in nearby towns such as Shrewsbury (8 miles south-west), Madeley (13 miles south-east), Market Drayton (9 miles north-east), Coleham (8 miles south-west), Kingsland (8 miles south-west) and Whitchurch (12 miles north).
Landmarks near Moreton Mill
We visit homes around Church of St Andrew. The closest station to Moreton Mill is Yorton station, about 4.5 miles west of the centre. Further afield, we also cover the area around Moreton Corbet Castle (1 mile west). Open spaces near Moreton Mill include Hawk Lake.
How it works
We work cleanly and quietly. Protection goes down first, then the job itself takes a few hours. At the end we talk you through the curing time and the aftercare.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- We leave it to cure, usually overnight.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Get a quote
For a price in Moreton Mill, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
How we price non-slip bath coating
There is no area surcharge for Moreton Mill. The price reflects:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- Previous DIY repairs that have to come out
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Before you send photos, these tips help us give you a firm price:
- One picture of the whole bath or shower tray
- What it’s made of, if you know
- Details of any past repairs
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
What a repair can’t fix
To be straight with you, there are a few things a repair will not fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Enamelled baths
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
- Shower trays
Repairing versus replacing in Moreton Mill
The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Usually one visit, start to finish
- Free fixed quotes from pictures
- Repair technicians who travel to you, UK-wide
See our pricing.
Nearby places to Moreton Mill
More services for Moreton Mill
About our accreditations · Every repair comes with a one-year guarantee.
