Wiltshire · England
Non-slip bath & shower coating in Porton, Wiltshire
Non-slip bath coating across Porton and nearby, done in a single visit in most cases.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
Non-slip bath coating in Porton, done in place
It suits older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. Common call-outs are for bath mats that harbour mould or get forgotten and worn-out textured areas, on enamelled baths, shower trays and acrylic baths.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Porton (SP4)
- Region
- Wiltshire
- Guarantee
- 12 months on all our work
- Quote
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Porton
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What we can’t put right
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly before you book.
What we work on
- Acrylic baths
- Resurfaced baths
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
Places near Porton
What else we do in Porton
Our work in Porton
Porton is about 3 miles south-east of Amesbury, in Wiltshire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Our technicians cover 425 places in Wiltshire. You can also see our page for London, about 75 miles away.
Postcode districts we cover here: SP4. Streets in the area include High Street, The Avenue and Bourne Gardens. We also cover the places around Porton: Idmiston (1 mile north-east), Gomeldon (1 mile south), Winterbourne Gunner (1 mile south-west), Boscombe (1 mile north-east) and Winterbourne Dauntsey (2 miles south-west). Within a short drive, we also cover Salisbury (5 miles south-west), Amesbury (3 miles north-west), Bugmore (5 miles south-west), Milford (5 miles south-west), Old Sarum (3 miles south-west) and Harnham (6 miles south-west).
Around Porton
Locally, our jobs take us to homes close to Church of St Nicholas and St Nicholas Church of England Primary School, among other places. Other landmarks nearby include Old Sarum (4.1 miles south-west). Open spaces near Porton include Winterbourne Downs RSPB reserve and Boscombe Down West.
Porton: your questions answered
How do I get a price for non-slip bath coating in Porton?
Because every job differs, we price from photos. You will get a fixed figure before you book.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Do you work in Porton?
Yes. We cover the whole UK and travel to Porton and the rest of Wiltshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Is my repair covered?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so mention it when you send photos.
Prices and what affects them
We do not charge extra for travel to Porton. The price depends on:
- The material and finish
- The size and number of damaged areas
- Where the damage is and how we get to it
- The type of damage
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- Details of any past repairs
- A clear, close picture of the problem area
- Where you are, by postcode
- A coin beside the damage so we can judge size
The quickest way to a price is to send a couple of photos using our quote form or ring us. We’ll say immediately whether it can be repaired.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
What happens on the day
Arrival times are agreed in advance. Once we’re there, the work takes a morning or an afternoon for most jobs. We leave the room clean.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Advice
What we’re called out for in Porton
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Get in touch if you’ve noticed:
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Before booking anyone
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the pictures show
- How to care for the finish
- Whether the price covers travel
Repairing versus replacing in Porton
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
What you get with us
- Fixed prices from your pictures
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
- No extra charge for your area
Read our full price list.
About our accreditations · Every repair comes with a one-year guarantee.
