Calderdale · England
Non-Slip Bath Coating for Pule Hill homes
Clear non-slip coatings for baths and shower trays at your home in Pule Hill, with a one-year guarantee on every repair.
- Worn-out textured areas
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our non-slip bath coating in Pule Hill
It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. Common call-outs are for bath mats that harbour mould or get forgotten and safety for older or less mobile people, in resurfaced baths, enamelled baths and wet room floors (ask us).
A one-year guarantee comes as standard, so you are not left on your own once we have gone. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Pule Hill (HX3)
- Area hub
- Calderdale
- Guarantee
- One year on every repair
- Quotes
- Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Do you need non-slip bath coating in Pule Hill?
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Look out for these signs:
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
What to look for in a quote
- What prep work is covered
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
- How the room is protected while they work
Repairing versus replacing in Pule Hill
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Pule Hill customers choose us
- We come to you, anywhere in the UK
- Everything repaired in place
- Honest advice, even when it means no job
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing.
Other services in Pule Hill
Covering Pule Hill
Pule Hill is about 1 mile north of Akroydon, in Calderdale. Whether you’re in the middle of Pule Hill or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 129 towns and villages in Calderdale, from the larger towns to small villages. Our nearest city page is Leeds, about 14 miles away.
We cover every part of HX3 and the streets around it. You’ll find streets such as Pule Green Lane and Ploughcroft Lane, and we cover them all. Neighbouring places we cover include Boothtown (1 mile south-west), Shibden Dale (1 mile east), Akroydon (1 mile south), Ovenden (1 mile west) and Lee Mount (1 mile south-west). We also work in nearby towns such as Brighouse (4 miles south-east), Todmorden (10 miles west), Elland (4 miles south), Hebden Bridge (6 miles west), Sowerby Bridge (4 miles south-west) and Rastrick (5 miles south-east).
Near you in Pule Hill
Locally, our jobs take us to homes close to Shroggs Park, Akroydon Primary Academy and Lock Stock & Barrel pub, among other places. Other local landmarks include Trinity Academy (1 mile north-west), The Ridings School (1 mile west), Serbian Orthodox Church (0.5 miles south) and Harrison House (1.5 miles south). For rail, the closest station is Halifax station, roughly 1.5 miles south. Other landmarks nearby include Calderdale Industrial Museum (1.4 miles south) and Royal Halifax Infirmary (2 miles south).
- Parks and local facilities nearby include Halifax Rural District (2.5 miles south-east)
What affects the price in Pule Hill
Quotes are free and the price is fixed. What we look at:
- Any earlier repairs that need removing first
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- The material
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Most quotes are done from pictures alone. To help us price it:
- The material, if you know it
- One sharp close-up of the damage
- Where you are, by postcode
- Natural light rather than flash
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
How the visit works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and the room is left clean and tidy.
- We clean and degrease the standing area.
- Next we mask off the area.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, typically overnight.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Make sure the room can be ventilated
- Tell us about any previous repairs or coatings
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed quote the same day in most cases.
Related advice
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Pule Hill, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Questions from Pule Hill
What information do you need?
Photos of the damage, a photo of the entire bath or shower tray and your postcode. Then we’ll agree a date.
How much does non-slip bath coating cost in Pule Hill?
Because every job differs, we price from photos. You will get a fixed figure before booking.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Shower trays
- Wet room floors (ask us)
- Acrylic baths
- Enamelled baths
- Resurfaced baths
About our accreditations · Every repair comes with a one-year guarantee.
