Shropshire · England

Non-Slip Bath Coating for Pulley homes

We travel to Pulley for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.

  • Safety for older or less mobile people
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Pulley?

The process

Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes a morning or an afternoon. The room is left tidy and you’ll know when it can be used.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Ensure the room can be ventilated
  • Let us know which floor the room is on
  • Have somewhere for us to park nearby if possible

Get a quote

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can give you a fixed quote without visiting.

Send photos for a quote

Related advice

Non-slip bath coating at your home in Pulley

It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. We work on shower trays, acrylic baths and resurfaced baths, and the jobs we see most are a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten.

Whatever the size of the job, you get the same one-year guarantee in Pulley and across Shropshire. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Location
Pulley (SY3)
Area hub
Shropshire
Warranty
One year on every repair
Price
Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Pulley questions

What areas do you cover?

We work UK-wide. Our prices are the same everywhere.

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

Will there be a smell?

There can be some smell while we work, which is why we ventilate. It clears as the materials cure.

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

How do I clean it?

Yes. Use a soft brush and a mild cleaner.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.

For landlords and businesses

We regularly work with letting and managing agents. Send the address, photos and access details.

We work for landlords, letting agents and housing providers in Pulley as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

What affects the price in Pulley

Quotes are free and the price is fixed. What we look at:

  • Whether it’s a chip, crack, burn or wear
  • The material
  • How many areas need work
  • The colour and finish to match

We charge the same wherever you are, so there’s no premium for Pulley. What changes the price is the job itself: the material, the amount of damage and how many items.

Send photos for a quote

We price nearly every job from photos. This is what to send:

  • A picture taken from further back
  • The material, if you know it
  • One sharp close-up of the damage
  • Whether it’s been repaired or coated before

The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.

Repair or replace in Pulley?

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Why book with us

  • One price list for the entire UK
  • Everything repaired in place
  • Rooms protected and left tidy
  • We come to you, anywhere in the UK

Read our prices page.

When we would advise against a repair

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Acrylic baths
  • Wet room floors (ask us)
  • Shower trays
  • Resurfaced baths
  • Enamelled baths

What we are called out for in Pulley

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

It’s worth getting a quote if you see:

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people

Comparing quotes

  • Whether there are any call-out or travel charges
  • Who will actually do the work
  • What prep work is covered
  • How to look after the finish

Our hiring checklist

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

Our work in Pulley

Pulley is about 2 miles south-west of Shrewsbury, in Shropshire. Across the SY3 area, we come to you. We work in all 433 towns and villages across Shropshire. Our nearest city page is Birmingham, about 39 miles away.

All of SY3 is covered. Streets in the area include Pulley Lane and Lower Pulley Lane. We also travel to Hook-a-Gate (1 mile west), Bayston Hill (1 mile south), Meole Brace (1 mile north-east), Nobold (1 mile north-west) and Redhill (1 mile west). We also work in nearby towns such as Madeley (14 miles east), Monkmoor (3 miles north-east), Bagley (3 miles north), Underdale (3 miles north-east), Wem (12 miles north) and Broseley (13 miles east).

Landmarks near Pulley

In Pulley, that means homes near Meole Brace School, Oakmeadow Church of England Primary and Nursery School and Christ Church. The closest station to Pulley is Shrewsbury station, roughly 2.3 miles north. A little further out are Beeches Hospital (0.5 miles south-west) and Clive House Museum (1.8 miles north). For a walk, there’s Bomere Pool and Haughmond Hill.

Map of Pulley © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.