Shropshire · England
Bath Re-enamelling in Pulley
Our repair technicians come to Pulley for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
How we handle bath re-enamelling in Pulley
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Common call-outs are for a peeling or bubbling previous coating and an outdated colour you’d like to change, on basins & shower trays, Victorian roll-tops and acrylic baths.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Pulley (SY3)
- Area hub
- Shropshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Pulley
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Repair or replace in Pulley?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why Pulley clients choose us
- One-year guarantee on every repair
- Nothing taken out or refitted
- One visit for most repairs
- Straight answers about what a repair can do
See our full price list and guide to resurfacing and replacement costs.
What affects the price in Pulley
Resurfacing from £350. We price every job individually. The main factors are:
- Doing more than one item at once
- What the surface is made of
- The type of damage
- How easy the damage is to reach
Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send pictures for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- A photo taken from further back
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
What we can’t put right
Some jobs are not right for a repair, for example:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How it works
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the job itself takes a full day. At the end we talk you through how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Preparing for the visit
- Let us know if it has been repaired before
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Common questions in Pulley
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
How do I get a price for bath re-enamelling in Pulley?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Will there be a smell?
Expect a mild smell while we’re working that clears as it cures.
Do you work in Pulley?
We do. Technicians travel to Pulley from across the region, and the price is the same as everywhere else.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Towns and villages near Pulley
What else we do in Pulley
How to care for the repair
Once the work has cured, treat it gently:
- Respect the curing time we give you
- Never use suction bath mats
- A dripping tap should be fixed promptly
- Have chips seen to early
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Pulley and the surrounding area
Pulley is about 2 miles south-west of Shrewsbury, in Shropshire. Whether you’re in the middle of Pulley or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 433 towns and villages across Shropshire, from the larger towns to small villages. Our jobs stretch from Pulley to Birmingham (about 39 miles away).
Every address in SY3 is covered. Local streets include Pulley Lane and Lower Pulley Lane, all of which we cover. If you’re just outside Pulley, we cover Hook-a-Gate (1 mile west), Bayston Hill (1 mile south), Meole Brace (1 mile north-east), Nobold (1 mile north-west) and Redhill (1 mile west). Within a short drive, we also cover Madeley (14 miles east), Monkmoor (3 miles north-east), Bagley (3 miles north), Underdale (3 miles north-east), Wem (12 miles north) and Broseley (13 miles east).
Local landmarks in Pulley
Locally, our jobs take us to homes close to Meole Brace School, Oakmeadow Church of England Primary and Nursery School and Christ Church and the streets around them. The nearest railway station is Shrewsbury station, about 2.3 miles north of the centre. Nearby you will also find Beeches Hospital (0.5 miles south-west) and Clive House Museum (1.8 miles north). For a walk, there’s Bomere Pool and Haughmond Hill.
About our accreditations · Every repair comes with a one-year guarantee.
