Swansea · Wales
Non-slip bath & shower coating in Pyle, Swansea
Non-slip bath coating for Pyle, without a refit. Send us pictures for a fixed price, then we come to you.
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Non-slip bath coating in Pyle without replacing anything
It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We regularly repair shower trays, resurfaced baths and enamelled baths, and people most often call us about a bath or tray that is slippery when wet and resurfaced baths that are now too smooth.
Every job is backed for twelve months. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Pyle (SA3)
- County
- Swansea
- Cover
- 12 months on all our work
- Price
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When we’d advise against a repair
To be straight with you, there are a few things a repair will not fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Pyle
- Enamelled baths
- Shower trays
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
What we do, step by step
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the job itself takes a few hours. At the end we talk you through how soon it can be used and how to look after it.
- We clean and degrease the standing area.
- Next we mask off the area.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- We leave it to cure, normally overnight.
How to prepare
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Advice
Also near Pyle
What else we do in Pyle
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why choose Surface Doctor in Pyle
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
- Same prices wherever you are
- One-year guarantee on every repair
See our pricing.
Do you need non-slip bath coating in Pyle?
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Most people get in touch when they notice something like this:
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
Questions to ask before you book
- What prep work is covered
- The length of the guarantee and what it covers
- How long it needs to cure
- A fixed quote, and whether VAT is included
How we price non-slip bath coating
We charge the same across the UK, including Pyle. The price reflects:
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Previous DIY repairs that have to come out
We charge the same wherever you are, with no extra for Pyle. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
You can take the photos on your phone. Ensure they show:
- Natural light rather than flash
- One sharp close-up of the damage
- A wider photo showing the whole bath or shower tray
- A coin or ruler next to the damage for scale
To get a price, send two or three photos through our quote form or call us. We will tell you honestly if a repair is the right fix.
Landlords, agents and businesses in Pyle
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Landlords, letting agents and housing providers in Pyle use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
FAQs for Pyle
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we will plan for it.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Will I see the coating?
Very little: it shows as a matt area where you stand.
Where we work around Pyle
Pyle is about 6 miles south-west of Swansea, in Swansea. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover 153 places across Swansea.
Jobs in SA3 are booked in the same way as anywhere else. We regularly work on streets such as Headland Road, Headland Close and Brandy Cove Road and the roads around them. We also cover the places around Pyle: Bishopston (1 mile north), Murton (1 mile north-east), Caswell (1 mile south-east), Manselfield (1 mile north-east) and Kittle (1 mile north-west). Larger places within reach include Swansea (6 miles north-east), Castle (6 miles north-east), Morriston (8 miles north-east), Mount Pleasant (5 miles north-east), Gorseinon (6 miles north) and Dyfaty (6 miles north-east).
Landmarks near Pyle
In Pyle, that means homes near Church of St Teilo, Plough & Harrow pub and Bishopston Comprehensive School. Nearby you’ll also find Bishopston Old Castle (1.1 miles north) and Egypt Centre - Swansea University (3.8 miles north-east). For a walk, there’s Pwlldu Head and Bishop's Wood.
About our accreditations · Every repair comes with a one-year guarantee.
