Cardiff · Wales
Non-Slip Bath Coating for Radyr homes
Non-slip bath coating across Radyr and nearby, done in a single visit in most cases.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Landlords, agents and businesses in Radyr
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We work for landlords, letting agents and housing providers in Radyr as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Non-slip bath coating in Radyr, done in place
It’s popular with homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We work on enamelled baths, shower trays and wet room floors (ask us), and people most often call us about resurfaced baths that are now too smooth and safety for older or less mobile people.
Your repair is guaranteed for a year, as with every job we do. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Location
- Radyr (CF15, CF5)
- County
- Cardiff
- Guarantee
- 12 months on all our work
- Price
- Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need non-slip bath coating in Radyr?
Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Look out for any of the following:
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
What your quote should include
- What happens if the damage is worse than the photos show
- Aftercare advice
- How long it needs to cure
- Is the price fixed, and does it include VAT?
What affects the price in Radyr
We charge the same across the UK, including Radyr. The price reflects:
- Whether it’s a chip, crack, burn or wear
- The material and finish
- The colour and finish to match
- How many areas need work
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
Two or three clear pictures are typically enough. It helps if you send:
- One sharp close-up of the damage
- Any earlier repairs or coatings
- Where you are, by postcode
- Something in shot to show the size
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly.
What we work on
- Resurfaced baths
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Acrylic baths
Our work in Radyr
Radyr is about 2 miles north of Ely, in Cardiff. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Our technicians cover 91 places in Cardiff.
Postcode districts we cover here: CF15 and CF5. That includes homes on Drysgol Road, Windsor Road and St John Avenue. Neighbouring places we cover include Radyr and Morganstown (1 mile north), Rhydlafr (1 mile west), Danescourt (1 mile south-east), Morganstown (1 mile north) and Coryton (1 mile north-east). Larger places within reach include Cardiff (3 miles east), Castle (4 miles south-east), Adamsdown (5 miles east), Roath (4 miles east), Splott (5 miles east) and Newtown (5 miles south-east).
Landmarks near Radyr
Locally, our jobs take us to homes close to Radyr Comprehensive School, Radyr Tap and Hailey Park and the streets around them. You will also find Ysgol Gynradd Groes-wen Primary School (0.5 miles south-east) and Church of Christ Church (0.5 miles north-east). The closest station to Radyr is Radyr station, roughly 0.7 miles north-east. A little further out are Morganstown Castle Mound (1.3 miles north) and Creigiau & St Fagans (0.9 miles west). The countryside around Radyr includes Roath Park Lake and Garth Wood.
How it works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. You can expect it to take a morning or an afternoon, and we will tell you if anything changes.
- We clean and degrease the standing area.
- Next we mask off the area.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- We leave it to cure, typically overnight.
Before we arrive
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
- Point us to the nearest place to park
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
Questions from Radyr
What happens next?
We review the pictures and send a fixed quote.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Will the price change on the day?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Will I see the coating?
Very little: it shows as a matt area where you stand.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
More services for Radyr
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Repair or replace: which is better?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating adds grip to the bath you have. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Work done at your home or business
- CHAS and Constructionline accredited
- A year’s guarantee on all work
- Rooms protected and left tidy
Take a look at our prices page.
About our accreditations · Every repair comes with a one-year guarantee.
