Lancashire · England

Non-Slip Bath Coating in Rising Bridge

Our technicians come to Rising Bridge for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Rising Bridge

Non-slip bath coating at your home in Rising Bridge

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Whether it’s bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet, we can generally put it right, whatever the material.

All our work is covered by a one-year guarantee. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Location
Rising Bridge (BB5)
Region
Lancashire
Cover
One year on every repair
Quote
Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026

Prices and what affects them

You will know the full cost before booking. We take into account:

  • Previous DIY repairs that have to come out
  • Whether we combine several jobs
  • Access to the area
  • How hard the colour is to match

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

How to get a fixed quote

You can take the photos on your phone, there is no need for anything special. Make sure they show:

  • Daylight if possible, and no flash reflection
  • A coin or ruler next to the damage for scale
  • One picture of the entire bath or shower tray
  • Any earlier repairs or coatings

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them to us. What comes back is a fixed price, not a guess.

Should I try a DIY kit first?

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

What happens on the day

The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a morning or an afternoon. Before we leave, we explain how soon it can be used and how to care for it.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

How to prepare

  • Let us know which floor the room is on
  • Let us know if it has been repaired before
  • Have somewhere for us to park nearby if possible

How to get a price

For a price in Rising Bridge, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Advice

Why repair rather than replace?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why us?

  • Every repair guaranteed for a year
  • Same prices wherever you are
  • Everything repaired in place
  • Work done at your home or business

Read our pricing.

Common questions in Rising Bridge

What information do you need?

Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.

How quickly can you book me in?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Do you work in Rising Bridge?

We do. Repair technicians travel to Rising Bridge from across the region, and the price is the same as everywhere else.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Do you cover the whole of Lancashire?

Across the UK, so Rising Bridge is covered. Prices do not change with location.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.

Can you repair something that’s been repaired before?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

Do you do work for letting agents?

Yes, frequently. We can quote for several properties together and work between tenancies.

Do you need non-slip bath coating in Rising Bridge?

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

Common reasons people in Rising Bridge contact us are:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

Questions to ask before you book

  • What protection goes down before work starts
  • Whether there are any call-out or travel charges
  • How soon you can use it again
  • What preparation is included

Choosing a repair company

Rising Bridge and the surrounding area

Rising Bridge is about 2 miles north of Haslingden, in Lancashire. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Our technicians cover all 482 towns and villages in Lancashire. Our jobs stretch from Rising Bridge to Manchester (18 miles away).

Jobs in BB5 are booked in the same way as anywhere else. Whether you live on Northfield Road, Blackburn Road and Back Lane or a nearby road, we can come to you. Neighbouring places we cover include Hud Hey (1 mile south), Acre (1 mile south-east), Baxenden (1 mile north-west), Green Haworth (2 miles west) and Haslingden (2 miles south). Further out, we also cover Preston (15 miles west), Burnley (6 miles north-east), Chorley (13 miles south-west), Bamber Bridge (14 miles west), Leyland (15 miles west) and Nelson (9 miles north-east).

Local landmarks in Rising Bridge

Typical jobs here are in homes near The Hollins, Dog and Partridge pub and St John's Stonefold CofE Primary School. Rising Bridge’s nearest station is Accrington station, roughly 2.4 miles north-west. Nearby you’ll also find Hapton Castle (3.7 miles north) and Rossendale General Hospital (2.2 miles south-east). Green spaces nearby include Hameldon Hill.

Map of Rising Bridge © OpenStreetMap contributors

What a repair can’t fix

To be straight with you, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer before you book.

What we work on

  • Resurfaced baths
  • Shower trays
  • Wet room floors (ask us)
  • Enamelled baths
  • Acrylic baths

Landlord and trade work in Rising Bridge

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.