Kent · England

Non-slip bath & shower coating in River, Kent

Non-slip bath coating in River without the cost of replacing. Send us photos for a fixed price, then we come to you.

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in River

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why us?

  • Accredited with CHAS, Constructionline and SafeContractor
  • Normally one visit, start to finish
  • A fixed quote before booking
  • Every repair guaranteed for a year

Take a look at our pricing.

Non-slip bath coating at your home in River

The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for a bath or tray that is slippery when wet and worn-out textured areas, in resurfaced baths, enamelled baths and acrylic baths.

You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Where
River (CT17, CT16)
Region
Kent
Warranty
One year on every repair
Price
Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

When we’d advise against a repair

Before booking, it’s worth knowing the limits too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly before you book.

Materials we repair

  • Enamelled baths
  • Resurfaced baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Shower trays

Common problems we fix in River

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Send us a picture if you notice any of these:

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas

What your quote should include

  • Aftercare advice
  • How the colour is matched
  • What happens if the damage is worse than the photos show
  • Whether the price covers travel

Choosing a repair company

How we price non-slip bath coating

There is no charge for travel to River. The price comes down to:

  • Access to the area
  • How hard the colour is to match
  • The type of damage
  • Doing more than one item at once

Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Getting a price from photos

You can normally get a fixed price without us visiting. To help us price it:

  • What it’s made of, if you know
  • One picture of the whole bath or shower tray
  • Details of any past repairs
  • A close-up of the damage, in focus

For a price in River, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Can I fix it myself?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

The process

Arrival times are agreed in advance, so you know when to expect us. On site, it takes a few hours for most jobs. We leave the room clean and ready to use once it has cured.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Keep pets and children out of the room while we work
  • Let us know which floor the room is on
  • Open a window if you can

Get a quote

The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a free quote

Read more

Questions from River

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you cover the whole of Kent?

We work UK-wide, and that includes River. Our prices are the same everywhere.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in River.

Are there extra charges for River?

There’s no separate call-out charge. Your fixed price includes everything.

It’s been repaired before. Can you still fix it?

Normally, yes. We remove the old repair before doing a new one, so let us know about it.

What if the damage is worse than the photos show?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

What happens once I’ve sent pictures?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

What information do you need?

Photos of the damage, a photo of the whole bath or shower tray and your postcode. After that, we just agree a date.

Landlord and trade work in River

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

River and the surrounding area

River is about 1 mile north-west of Dover, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. River is one of 922 towns and villages in Kent we cover. You can also see our page for London, about 64 miles away.

Our visits in CT17 and CT16 are booked in the same way as anywhere else. Whether you live on Lower Road, Minnis Lane and London Road or a nearby road, we can come to you. We also cover the places around River: Kearsney (1 mile north-west), Temple Ewell (1 mile north-west), Dover (1 mile south-east), Whitfield (1 mile north-east) and Maxton (2 miles south). Within a short drive, we also cover Canterbury (13 miles north-west), Folkestone (6 miles south-west), Ramsgate (15 miles north-east), Deal (7 miles north-east), Hythe (10 miles south-west) and Walmer (7 miles north-east).

Local landmarks in River

Locally, our jobs take us to homes close to Dover Christ Church Academy, Church of St Peter and Old Park Hill, among other places. Nearby too are St Edmund's Catholic School (1.4 miles south-east), Royal Oak Cottage The Royal Oak Public House (less than half a mile south) and River Primary School (under half a mile south-west). For rail, the closest station is Kearsney station, about 0.5 miles north-west of the centre. Nearby you’ll also find Crabble Corn Mill (under half a mile south-east) and Dover Castle (2.2 miles south-east). Not far away are Dover Western Heights.

Map of River © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.