Cumbria · England

Non-Slip Bath Coating in Rookby

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Rookby. Free, fixed quotes from your photos.

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Rookby?

How we handle non-slip bath coating in Rookby

It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Typical jobs include safety for older or less mobile people and worn-out textured areas, in enamelled baths, wet room floors (ask us) and acrylic baths.

All of our repairs are guaranteed for twelve months in Rookby and everywhere else. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Location
Rookby (CA17)
Region
Cumbria
Warranty
One year on every repair
Price
Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026

How the visit works

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a morning or an afternoon. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, usually overnight.

Before we arrive

  • Plan for the room to be out of bounds to pets and children
  • Clear the area around the damage
  • Ensure the room can be ventilated

Getting a price

For a price in Rookby, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Get a fixed quote

Read more

Honest limits

To be straight with you, there are a few things a repair will not fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think.

What we work on

  • Resurfaced baths
  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths

Work for landlords and builders

We are used to working with agents and managing companies. Just send pictures, the address and how to get access.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

FAQs for Rookby

Are there extra charges for Rookby?

We do not add a call-out fee. The fixed price covers the visit and the work.

Which areas do you work in?

Across the UK, and that includes Rookby. Prices don’t change with location.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Do you work in Rookby?

Yes. We cover the entire UK and travel to Rookby and the rest of Cumbria. Send photos and we’ll quote, or call 0345 017 0787.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

How much does non-slip bath coating cost in Rookby?

Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.

Prices and what affects them

A fixed quote means you know the cost before booking. We take into account:

  • The material
  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it
  • How many items we do on one visit

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from photos

Most quotes are done from pictures alone. To make it quick:

  • Natural light rather than flash
  • A wider photo showing the entire bath or shower tray
  • Any earlier repairs or coatings
  • What it’s made of, if you know

Most customers in Rookby get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

Repair or replace in Rookby?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why book with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Honest advice, even when it means no job
  • One visit for most repairs
  • One price list for the whole UK

Read our pricing.

Signs you need non-slip bath coating in Rookby

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

The things customers generally mention when they call are:

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth

Before you book anyone

  • What aftercare is recommended
  • If travel is included in the price
  • The length of the guarantee and what it covers
  • What protection goes down before work starts

Choosing a repair company

Where we work around Rookby

Rookby is about 21 miles north-east of Kendal, in Cumbria. Wherever you are in the CA17 postcode area, a technician comes to you. Rookby is one of 438 towns and villages in Cumbria where we work. Our nearest city page is Newcastle upon Tyne, about 43 miles away.

We cover every part of the CA17 postcode area. Other places close to Rookby include Church Brough (2 miles north), Brough (2 miles north), Kirkby Stephen (2 miles south-west), Great Musgrave (3 miles north-west) and Helbeck (3 miles north). We also work in nearby towns such as Appleby-in-Westmorland (9 miles north-west), Sedbergh (15 miles south-west), Bongate (9 miles north-west) and Shap (15 miles west).

Near you in Rookby

Our clients here include homes close to Kirkby Stephen Grammar School and the streets around them. The nearest railway station is Kirkby Stephen station, about 3.7 miles south-west of the centre. A little further out are Augill Castle (1.8 miles north). For a walk, there’s Stainmore Summit and Brownber Tarn.

Map of Rookby © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.