Aberdeenshire · Scotland

Non-Slip Bath Coating in St Fergus

Local non-slip bath coating for St Fergus: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near St Fergus

What we do, step by step

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes a few hours, and we’ll tell you if anything changes.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, typically overnight.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Let us know which floor the room is on
  • Open a window if you can

How to get a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job the same day in most cases.

Get a free quote

Related advice

Non-slip bath coating in St Fergus, done in place

It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. We regularly repair shower trays, acrylic baths and wet room floors (ask us), and the jobs we see most are a bath or tray that is slippery when wet and worn-out textured areas.

All of our repairs are guaranteed for twelve months in St Fergus and everywhere else. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Where
St Fergus (AB42)
Area hub
Aberdeenshire
Warranty
12 months on all our work
Quotes
Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What a repair can’t fix

A repair isn’t right for every job, for example:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly before booking.

What we work on

  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Resurfaced baths

Prices and what affects them

You will not pay by the hour. The price is based on:

  • Whether we combine several jobs
  • How much damage there is
  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out

There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from photos

Photographing the damage takes a minute. Please include:

  • Details of any past repairs
  • One picture of the entire bath or shower tray
  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Repair or replace: which is better?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. Our prices are the same across the UK, so there’s no premium for St Fergus. The job itself decides the price: the material, the amount of damage and how many items.

Why choose Surface Doctor in St Fergus

  • A year’s guarantee on all work
  • Work done at your home or business
  • No extra charge for your area
  • Nothing taken out or refitted

Take a look at our full price list.

Should I try a DIY kit first?

A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

About St Fergus

St Fergus is about 4 miles north-west of Peterhead, in Aberdeenshire. Anywhere in AB42, we come to you. St Fergus is one of 161 places in Aberdeenshire where we work.

Every address in AB42 is covered. Local streets include Alwyn Wynd, Newton Road and Newton Grove. Neighbouring places we cover include Kirktown (1 mile west), Rora (2 miles south-west), Keyhead (3 miles north-west), Inverugie (3 miles south) and Downiehills (3 miles south). We also work in nearby towns such as Peterhead (4 miles south-east), Fraserburgh (11 miles north-west), Roanheads (4 miles south-east), Clerkhill (4 miles south), Port Henry (4 miles south-east) and Mintlaw (6 miles west).

Near you in St Fergus

In St Fergus, that means homes near St Fergus Parish Church and Churchyard and the streets around them. Well-known places in the area include Inverugie Castle (2.4 miles south) and Ugie Hospital (3.5 miles south-east). Green spaces nearby include Loch of Strathbeg and Meet Hill.

Map of St Fergus © OpenStreetMap contributors

For landlords and businesses

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.

St Fergus questions

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

What does non-slip bath coating cost?

The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.

Do you work in St Fergus?

Yes, we do. We send a technician to St Fergus for every job, and the price is the same as everywhere else.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

Is there a call-out fee?

There is no separate call-out charge. The fixed quote covers the visit and the work.

Will there be a smell?

Expect a mild smell while we’re working that clears as it cures.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

Do you need non-slip bath coating in St Fergus?

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Signs it’s time to call us include:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
  • Worn-out textured areas

What your quote should include

  • Who will actually do the work
  • A fixed price, and whether VAT is included
  • Aftercare advice
  • How the room is protected while they work

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.