Orkney Islands · Scotland

Non-slip bath & shower coating in St Mary's, Orkney Islands

Fixed-price non-slip bath coating in St Mary's and the surrounding area, typically in one visit.

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in St Mary's

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

How we handle non-slip bath coating in St Mary's

It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We regularly repair resurfaced baths, shower trays and wet room floors (ask us), and common reasons people get in touch are a bath or tray that is slippery when wet and safety for older or less mobile people.

All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Area
St Mary's (KW17)
Area hub
Orkney Islands
Warranty
A year, on every repair
Price
Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What we can’t put right

To be straight with you, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we will say what we think before you book.

Surfaces we repair

  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Resurfaced baths
  • Acrylic baths

Work for landlords and builders

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Should you replace it?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.

Why choose Surface Doctor in St Mary's

  • Honest advice, even when it means no job
  • Work done at your home or business
  • A fixed quote before you book
  • Same prices wherever you are

Read our prices page.

How we price non-slip bath coating

There are no hourly rates or hidden extras. The price depends on:

  • What the surface is made of
  • Doing more than one item at once
  • The size and number of damaged areas
  • Access to the area

Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

How to get a fixed quote

Phone photos are fine. Just make sure we can see:

  • One sharp close-up of the damage
  • One picture of the whole bath or shower tray
  • A coin or ruler next to the damage for scale
  • The postcode, so we can plan the visit

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Questions from St Mary's

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

What information do you need?

Just pictures, your postcode and a contact number. On the day, we only need access to the room.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What areas do you cover?

The entire UK, including all of the Orkney Islands. Send your postcode with your pictures and we will confirm dates.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Can you redo someone else’s repair?

In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

What happens on the day

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which typically takes a few hours. If anything looks different from your photos, we will talk to you before going ahead.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, normally overnight.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Tell us if there are stairs or a lift
  • Tell us about any previous repairs or coatings

Getting a price

Send us photos of the damage and a wider shot of the whole item, and tell us you are in St Mary's, and we will reply with a fixed quote.

Get a fixed price

Read more

What we are called out for in St Mary's

Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

These are the problems we’re asked about most:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Questions to ask before you book

  • What protection goes down before work starts
  • How to look after the finish
  • If travel is included in the price
  • Whether the colour is mixed to match

Choosing a repair company

Covering St Mary's

St Mary's is about 6 miles south of Kirkwall, in the Orkney Islands. Clients in St Mary's get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We cover all 51 towns and villages across the Orkney Islands.

Here we cover the KW17 postcode area. You will find streets such as Station Square, St Mary's Road and Storehouse Place, all of which we cover. Other places close to St Mary's include Upper Sanday (3 miles east), Burray Village (4 miles south), Toab (4 miles north-east), Grimness (5 miles south) and St Margaret's Hope (5 miles south). St Mary's is among the bigger towns we cover in the Orkney Islands. For island and remote addresses, call first so we can plan the visit.

Landmarks near St Mary's

We visit homes around Mass Howe, among other places. Further afield, we also cover the area around Balfour Hospital (5.8 miles north) and Graemeshall Museum (0.5 miles north-east). Green spaces nearby include Gaitnip Hill and Loch of Ayre.

Map of St Mary's © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.