Cheshire West and Chester · England

Non-Slip Bath Coating for Stoak homes

Clear non-slip coatings for baths and shower trays for homeowners, landlords and businesses in Stoak. Free, fixed quotes from your photos.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Stoak

How we handle non-slip bath coating in Stoak

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. If you’re dealing with safety for older or less mobile people and a bath or tray that is slippery when wet, we can typically put it right, whatever the material.

Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Where
Stoak (CH2)
Region
Cheshire West and Chester
Warranty
One year on every repair
Price
Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

How we price non-slip bath coating

We price every job individually. What matters most is:

  • The type of damage
  • How many areas need work
  • Previous DIY repairs that have to come out
  • What the surface is made of

Set against the cost of replacement, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Getting a price from photos

You can generally get a fixed quote without us visiting. To help us price it:

  • What it’s made of, if you know
  • Good light, ideally daylight, without flash glare
  • One sharp close-up of the damage
  • A photo taken from further back

For a price in Stoak, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Work for landlords and builders

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

When a repair isn’t the answer

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly before you book.

What we work on

  • Resurfaced baths
  • Acrylic baths
  • Enamelled baths
  • Shower trays
  • Wet room floors (ask us)

How it works

We begin by going over the job with you. Next, we cover and mask everything nearby and we start. You can expect it to take a few hours.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Let us know about parking or access
  • Let us know if it has been repaired before
  • Have a window or extractor fan available

How to get a price

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

Send pictures for a quote

Read more

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Do you need non-slip bath coating in Stoak?

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Signs it’s time to call us include:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten

Before you book anyone

  • Who turns up on the day
  • What the guarantee covers, and for how long
  • If travel is included in the price
  • How to care for the finish

Our hiring checklist

About Stoak

Stoak is about 3 miles south-east of Ellesmere Port, in Cheshire West and Chester. Wherever you are in the CH2 postcode area, we come to you. We cover 224 places across Cheshire West and Chester. Our nearest city page is Liverpool, about 11 miles away.

Our technicians cover all of CH2. That includes homes on Church Lane, Little Stanney Lane and Bunbury Close and the roads around them. We also travel to Croughton (1 mile south-west), Wervin (1 mile south), Little Stanney (1 mile north-west), Chorlton-by-Backford (1 mile south-west) and Picton (1 mile south-east). We also work in nearby towns such as Chester (4 miles south), Ellesmere Port (3 miles north-west), Winsford (15 miles east), Northwich (14 miles east), Neston (8 miles west) and Boughton (5 miles south).

Near you in Stoak

Typical jobs here are in homes near Rake Hall pub, Cheshire Oaks High School and St Lawrence's Church, among other places. The nearest railway station is Stanlow & Thornton station, about 2 miles north-east. Nearby you’ll also find Cheshire Oaks Designer Outlet (1.1 miles north-west) and Municipal Borough of Ellesmere Port (2.5 miles north-west). For a walk, there is Gowy Meadows Nature Reserve.

Map of Stoak © OpenStreetMap contributors

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

What you get with us

  • Fixed prices from your photos
  • Normally one visit, start to finish
  • A year’s guarantee on all work
  • Repair technicians who travel to you, UK-wide

Read our pricing.

Common questions in Stoak

Can you repair something that is been repaired before?

Typically, yes. The old repair comes out first, so let us know about it.

Will a non-slip coating change how my bath looks?

Only slightly: the treated area looks slightly matt.

Is repairing better than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.

What information do you need?

Send photos through the quote form or call 0345 017 0787.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you work in Stoak?

Yes, we do. We send a technician to Stoak for every job, and the price is the same as everywhere else.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.