Cheshire West and Chester · England
Non-slip bath & shower coating in Wervin, Cheshire West and Chester
Clear non-slip coatings for baths and shower trays in Wervin, carried out at your home and guaranteed for a year.
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
Non-slip bath coating in Wervin without replacing anything
It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Whether it’s bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, we can normally put it right.
We guarantee the work for a year. If something is not right in that time, we come back and put it right. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Area
- Wervin (CH2)
- Region
- Cheshire West and Chester
- Cover
- 12 months on all our work
- Quotes
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
Arrival times are agreed in advance. Once we are there, the work takes a few hours for most jobs. The room is left tidy and ready to use once it has cured.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- Once it has cured, normally overnight, it’s ready.
Preparing for the visit
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
- Point us to the nearest place to park
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Related advice
What a repair cannot fix
Some jobs aren’t right for a repair, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Wervin
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Shower trays
- Acrylic baths
What we are called out for in Wervin
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
People typically call us after spotting something like this:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
Before you book anyone
- Whether cleaning and preparation are in the price
- Whether a trained technician does the job
- What protection goes down before work starts
- A fixed quote, and whether VAT is included
Landlord and trade work in Wervin
If you manage property in Wervin, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.
Landlords, letting agents and housing providers in Wervin use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What affects the price in Wervin
There are no hourly rates or hidden extras. The price is based on:
- The size and number of damaged areas
- What the surface is made of
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Quotes from your pictures
Before you send pictures, a few simple things make all the difference:
- Any details about the material
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
Send us pictures of the damage and a wider shot of the whole item, with your CH2 postcode, and we’ll reply with a fixed quote.
About Wervin
Wervin is about 3 miles south-east of Ellesmere Port, in Cheshire West and Chester. Jobs in Wervin are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We work in 224 places in Cheshire West and Chester, from the larger towns to small villages. Our nearest city page is Liverpool, about 12 miles away.
Our technicians cover all of CH2. If you are just outside Wervin, we cover Croughton (1 mile north-west), Picton (1 mile east), Stoak (1 mile north), Chorlton-by-Backford (1 mile west) and Little Stanney (2 miles north-west). We also work in nearby towns such as Chester (3 miles south), Ellesmere Port (3 miles north-west), Winsford (14 miles east), Northwich (14 miles east), Neston (9 miles north-west) and Boughton (4 miles south).
Local landmarks in Wervin
Locally, our jobs take us to homes close to St Lawrence's Church and Upton-by-Chester High School and the streets around them. Wervin’s nearest station is Bache station, roughly 2.5 miles south-west. A little further out are Cheshire Oaks Designer Outlet (1.8 miles north) and Chester Castle (part) (3.9 miles south). The countryside around Wervin includes Gowy Meadows Nature Reserve.
Wervin questions
Are there extra charges for Wervin?
No. Our quotes include travel, and we charge the same wherever you are.
Can I add another job to the visit?
Of course, and it generally saves money. Send pictures of everything together and you will get one combined price.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
What happens next?
We come back with a fixed quote, normally with dates to choose from. There’s no obligation to book.
How much does non-slip bath coating cost in Wervin?
We give a fixed quote from your pictures. Send a close-up and a photo of the whole item and your postcode.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Will I see the coating?
Only slightly: the treated area looks slightly matt.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Wervin customers choose us
- Nothing taken out or refitted
- One price list for the whole UK
- We’ll tell you if it’s not worth repairing
- Free fixed quotes from pictures
Take a look at our prices page.
Places near Wervin
Also in Wervin
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
