Doncaster · England
Non-Slip Bath Coating for Styrrup homes
Non-slip bath coating in Styrrup without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Non-slip bath coating at your home in Styrrup
It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. We are often asked to fix a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, on enamelled baths, wet room floors (ask us) and resurfaced baths.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Styrrup (DN11)
- Region
- Doncaster
- Cover
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We regularly work with letting and managing agents. Send the address, photos and access details and we’ll handle the rest.
Our work in Styrrup
Styrrup is about 5 miles east of Maltby, in Doncaster. Across the DN11 area, we come to you. Our technicians cover 89 places across Doncaster. We work right across the region, from Styrrup to Leeds (34 miles away).
Here we cover the DN11 postcode area. That includes homes on Main Street, Pagdin Drive and Pinfold Lane. Close by, we cover Harworth (1 mile north-east), Bircotes (1 mile north-east), Scrooby (3 miles east), Bawtry (3 miles north-east) and Austerfield (4 miles north-east). Further out, we also cover Doncaster (8 miles north), Adwick le Street (12 miles north), Thorne (15 miles north), Conisbrough (8 miles north-west), Bentley (10 miles north) and Armthorpe (9 miles north).
What’s near Styrrup
We visit homes around Church of All Saints, Serlby Park Academy and Harworth CofE Academy. Well-known places in the area include Hospital of St Mary Magdalene (3 miles north-east) and Tickhill Castle (1.8 miles north-west).
Styrrup questions
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What does non-slip bath coating cost?
Because every job differs, we price from pictures. You will get a fixed figure before you book.
Do you cover Styrrup?
We do. Repair technicians travel to Styrrup from across the region, with no extra charge for travel.
Do the materials smell?
There may be a mild smell during the work.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Will I see the coating?
Only slightly: the treated area looks slightly matt.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
When we would advise against a repair
A repair isn’t right for every job, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Wet room floors (ask us)
- Shower trays
- Resurfaced baths
- Acrylic baths
- Enamelled baths
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. The price reflects the work involved, not your postcode. You will see the full price before booking.
Why Styrrup clients choose us
- Dust sheets down, tidy finish
- No need to remove anything
- We come to you, anywhere in the UK
- A year’s guarantee on all work
Take a look at our pricing.
What we’re called out for in Styrrup
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
Clients usually contact us about:
- Worn-out textured areas
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
Comparing quotes
- Whether there are any call-out or travel charges
- How the room is protected while they work
- A fixed price, and whether VAT is included
- What the guarantee covers, and for how long
What affects the price in Styrrup
Quotes are free and the price is fixed. What we take into account:
- The material
- Doing more than one item at once
- How easy the damage is to reach
- How hard the colour is to match
Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Details of any past repairs
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them to us. What comes back is a fixed price, not a guess.
What we do, step by step
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the work takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to look after it.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, usually overnight.
Preparing for the visit
- Open a window if you can
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
Ask for a price
To get a price, send a couple of pictures using our quote form or call us. We’ll say straight away whether it can be repaired.
Advice
Also near Styrrup
What else we do in Styrrup
About our accreditations · Every repair comes with a one-year guarantee.
