Flintshire · England
Non-slip bath & shower coating in Tai-Drill, Flintshire
Clear non-slip coatings for baths and shower trays at your home in Tai-Drill, with a one-year guarantee on every repair.
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
Repairing versus replacing in Tai-Drill
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- CHAS and Constructionline accredited
- Most jobs done in one visit
- A year’s guarantee on all work
- Fixed prices from your pictures
Take a look at our full price list.
Non-slip bath coating at your home in Tai-Drill
It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. If you are dealing with worn-out textured areas and a bath or tray that is slippery when wet, we can normally put it right, on shower trays, resurfaced baths and wet room floors (ask us) alike.
Whatever the size of the job, it’s backed by a one-year guarantee. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Tai-Drill (CH8, CH6)
- Area hub
- Flintshire
- Cover
- A year, on every repair
- Quotes
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
What we do, step by step
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. Allow a few hours, and we will keep you posted as we go.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- We apply the clear textured coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, generally overnight.
Getting ready for the visit
- Open a window if you can
- Ensure the area is dry
- Keep pets and children out of the room while we work
How to get a price
For a price in Tai-Drill, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Flintshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Honest limits
We would rather lose a job than do one that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Acrylic baths
- Shower trays
- Resurfaced baths
- Wet room floors (ask us)
- Enamelled baths
What non-slip bath coating costs
You will not pay by the hour. The price depends on:
- What kind of damage it is
- Access to the area
- The size and number of damaged areas
- Unusual colours or finishes
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
Good pictures mean an accurate price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- A picture taken from further back
- A coin or ruler next to the damage for scale
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Also near Tai-Drill
Other services in Tai-Drill
Tai-Drill and the surrounding area
Tai-Drill is about 1 mile north-east of Holywell, in Flintshire. Across the CH8 area, we come to you. Our repair technicians cover all 139 towns and villages across Flintshire. You can also see our page for Liverpool, about 14 miles away.
Our visits in CH8 and CH6 work the same way as everywhere else we cover. Local streets include Rayon Road, Mostyn Road and Bala Avenue. We also travel to Greenfield (1 mile north-west), Bryncelyn (1 mile south-west), Pen-y-maes (1 mile south), Holywell (1 mile south-west) and Carmel (1 mile west). Within a short drive, we also cover Connah's Quay (7 miles south-east), Buckley (9 miles south-east), Bwcle (10 miles south-east), Flint (4 miles south-east), Saltney (14 miles south-east) and Mold (9 miles south).
Local landmarks in Tai-Drill
Our customers here include homes close to Greenfield C.P. School, The Ship Inn and Parish Church of St James. You will also find Holy Trinity Church (less than half a mile north-west) and Ysgol Treffynnon (0.8 miles south-west). Tai-Drill’s nearest station is Flint station, roughly 3.9 miles south-east of the centre. Well-known places in the area include Basingwerk Manor (within half a mile north-west) and Holywell Community Hospital (1.3 miles south-west). Not far away are Pen y Ball Top.
When to call us in Tai-Drill
Baths and trays are made smooth so they’re easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Look out for these signs:
- Worn-out textured areas
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
What to look for in a quote
- Aftercare advice
- The length of the guarantee and what it covers
- How your room will be protected
- A fixed quote, and whether VAT is included
Tai-Drill: your questions answered
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
What happens after I send pictures?
You get a fixed quote and available dates. If we need another angle, we will ask.
Can you repair something that’s been repaired before?
Generally, yes. We remove the old repair before doing a new one, so let us know about it.
How do I get a price for non-slip bath coating in Tai-Drill?
Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the whole item with your CH8 postcode.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
Do you come to Tai-Drill?
Yes, we do. Technicians travel to Tai-Drill from across the region, with no extra charge for travel.
About our accreditations · Every repair comes with a one-year guarantee.
