Flintshire · England
Bath re-enamelling & resurfacing in Tai-Drill, Flintshire
Fixed-price bath re-enamelling in Tai-Drill and the surrounding area, usually in one visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- Worn patches where water runs and sits
About our bath re-enamelling in Tai-Drill
If your bath is sound but looks tired, re-enamelling is generally the most cost-effective option. It avoids removal, plumbing and re-tiling. Common call-outs are for an old resurfacing that’s failing and wear marks under the taps, on basins & shower trays, acrylic baths and Victorian roll-tops.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Location
- Tai-Drill (CH8, CH6)
- County
- Flintshire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Tai-Drill
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Tai-Drill. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- One price list for the whole UK
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
Read our full price list and guide to resurfacing and replacement costs.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
When a repair is not the answer
Before booking, it’s worth knowing the limits:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
For landlords and businesses
Landlords, letting agents and housing providers in Tai-Drill use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Also near Tai-Drill
Also in Tai-Drill
Do you need bath re-enamelling in Tai-Drill?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Send us a photo if you notice any of these:
- Several chips and rust patches
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
- A coloured bath you want in white
Before you book anyone
- Whether cleaning and preparation are in the price
- A fixed price, and whether VAT is included
- Who will actually do the work
- Whether there are any call-out or travel charges
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- The size and number of damaged areas
- The material
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
Quotes from your photos
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Something in shot to show the size
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- A photo taken from further back
For a price in Tai-Drill, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
What we do, step by step
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. Allow a full day, and we will keep you posted as we go.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Open a window if you can
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
How to get a price
Most customers in Tai-Drill get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Rinse off hair dye, oils and bath bombs straight away
- Dry the bath after use to stop limescale
- Do not leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Your questions about bath re-enamelling in Tai-Drill
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Where we work around Tai-Drill
Tai-Drill is about 1 mile north-east of Holywell, in Flintshire. Anywhere in CH8, a technician comes to you. Tai-Drill is one of 139 places in Flintshire we cover. You can also see our page for Liverpool, about 14 miles away.
Jobs in CH8 and CH6 work the same way as everywhere else we cover. Jobs here include addresses on Rayon Road, Mostyn Road and Bala Avenue and the roads around them. If you are just outside Tai-Drill, we cover Greenfield (1 mile north-west), Bryncelyn (1 mile south-west), Pen-y-maes (1 mile south), Holywell (1 mile south-west) and Carmel (1 mile west). Within a short drive, we also cover Connah's Quay (7 miles south-east), Buckley (9 miles south-east), Bwcle (10 miles south-east), Flint (4 miles south-east), Saltney (14 miles south-east) and Mold (9 miles south).
Near you in Tai-Drill
Typical jobs here are in homes near Greenfield C.P. School, The Ship Inn and Parish Church of St James, among other places. You will also find Holy Trinity Church (less than half a mile north-west) and Ysgol Treffynnon (0.8 miles south-west). For rail, the closest station is Flint station, about 3.9 miles south-east of the centre. A little further out are Basingwerk Manor (under half a mile north-west) and Holywell Community Hospital (1.3 miles south-west). Open spaces near Tai-Drill include Pen y Ball Top.
About our accreditations · Every repair comes with a one-year guarantee.
