Isle of Anglesey · Wales

Non-slip bath & shower coating in Talwrn, Isle of Anglesey

Non-slip bath coating in and around Talwrn: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Talwrn

FAQs for Talwrn

Do you cover the whole of Isle of Anglesey?

Everywhere in the UK, Talwrn included. There is no extra charge for travel.

How much does non-slip bath coating cost in Talwrn?

Because every job differs, we price from pictures. You know the full cost before anything is booked.

I rent my home. Can I book you?

We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Can you quote from photos?

Typically, yes. A close-up and a wider photo are enough to give a fixed price.

What happens next?

You get a fixed price and available dates. If we need another angle, we will ask.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

When can you do it?

That depends on our diary for your area. We will offer you dates when we send your quote.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.

Non-slip bath coating at your home in Talwrn

It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Typical jobs include resurfaced baths that are now too smooth and bath mats that harbour mould or get forgotten, across enamelled baths, acrylic baths and shower trays.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Location
Talwrn (LL77)
Region
Isle of Anglesey
Cover
One year on every repair
Price
Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026

Covering Talwrn

Talwrn is about 6 miles north-west of Bangor, in Isle of Anglesey. Anywhere in LL77, we carry out the work at your property. Talwrn is one of 115 towns and villages in Isle of Anglesey we cover. You can also see our page for Liverpool, about 56 miles away.

Every address in LL77 is covered. Streets in the area include Lon Llanffinan and Maes-y-Coed. Nearby, we also work in Pencraig (2 miles south-west), Penmynydd (2 miles south-east), Pentraeth (2 miles north-east), Plas Gwyn (2 miles east) and Pentre Berw (3 miles south). Further out, we also cover Holyhead (15 miles west), Blackbridge (15 miles west), Menai Bridge (5 miles south-east), Porthaethwy (5 miles south-east), Amlwch (10 miles north) and Morawelon (15 miles west).

Local landmarks in Talwrn

Locally, our jobs take us to homes close to St Ffinan's Church. Talwrn’s nearest station is Llanfairpwll station, roughly 4.1 miles south-east. Other landmarks nearby include Bodeilio Weaving Centre (less than half a mile west) and Ynys Cefni (2.4 miles south-west). The countryside around Talwrn includes Bron Alar and Llyn Cadarn.

Map of Talwrn © OpenStreetMap contributors

What we do, step by step

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a morning or an afternoon, and we finish by cleaning up and talking you through the result.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, typically overnight.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Make sure the room can be ventilated
  • Avoid using the area for a few hours before we arrive

Ask for a price

To get a price, send a couple of pictures through our quote form or ring us. We’ll say right away whether it can be repaired.

Send photos for a quote

Advice

What non-slip bath coating costs

You’ll know the full cost before you book. We look at:

  • How many areas need work
  • Whether we combine several jobs
  • What the surface is made of
  • The colour and finish to match

Our prices are the same across the UK, so there’s no premium for Talwrn. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your photos

Two or three clear pictures are usually enough. Try to include:

  • Good light, ideally daylight, without flash glare
  • A coin or ruler next to the damage for scale
  • A clear, close picture of the problem area
  • One picture of the whole bath or shower tray

If you are in Talwrn and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

What we cannot put right

In fairness, there are a few things a repair will not fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Talwrn

  • Acrylic baths
  • Enamelled baths
  • Resurfaced baths
  • Shower trays
  • Wet room floors (ask us)

Why repair rather than replace?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.

Why book with us

  • Everything repaired in place
  • A year’s guarantee on all work
  • Repair technicians who travel to you, UK-wide
  • Rooms protected and left tidy

Take a look at our full price list.

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

Landlord and trade work in Talwrn

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Common problems we fix in Talwrn

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Get in touch if you’ve noticed:

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

Before you book anyone

  • What preparation is included
  • Who turns up on the day
  • Is the price fixed, and does it include VAT?
  • How your room will be protected

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.