Central Bedfordshire · England

Non-Slip Bath Coating in Thorn

Non-slip bath coating in and around Thorn: photo quotes, tidy work and a year’s guarantee.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Thorn

What happens on the day

On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to a morning or an afternoon.

  1. We start by degreasing the area where you stand.
  2. Next we mask off the area.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Let us know which floor the room is on
  • Ensure the room can be ventilated

How to get a price

To get a price, send a couple of photos through our quote form or call us. We will tell you honestly if a repair is the right fix.

Send photos for a quote

Read more

Non-slip bath coating in Thorn without replacing anything

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Whether it’s resurfaced baths that are now too smooth and a bath or tray that is slippery when wet, we can help.

Every repair comes with our one-year guarantee, wherever you are in Central Bedfordshire. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Stained shower tray resurfaced to clean white, before and after
Area
Thorn (LU5)
County
Central Bedfordshire
Cover
One year on every repair
Quotes
Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026

FAQs for Thorn

Can you price it without visiting?

Yes, almost always. Clear pictures let us give you a fixed quote without visiting.

When can you do it?

It depends on the time of year and where you are. We’ll offer you dates when we send your quote.

What if the damage is worse than the photos show?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Can pets and children be at home?

Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.

Is a non-slip bath easy to clean?

Yes. Use a soft brush and a mild cleaner.

Do you work in Thorn?

Yes. We work across the UK and come to Thorn and the rest of Central Bedfordshire. Send pictures and we will quote, or call 0345 017 0787.

Where we work around Thorn

Thorn is about 1 mile west of Houghton Regis, in Central Bedfordshire. We travel to homes and businesses in Thorn and nearby villages, so there is no workshop to go to. Thorn is one of 121 places in Central Bedfordshire where we work. You can also see our page for London, about 34 miles away.

Here we cover the LU5 postcode area. We regularly work on streets such as Thorn Road, Collie Place and Alban Corner. Nearby, we also work in Bidwell (1 mile east), Chalk Hill (1 mile south), Wingfield (1 mile north), Houghton Regis (1 mile east) and Tebworth (2 miles north-west). Within a short drive, we also cover Leighton Buzzard (5 miles west), Flitwick (7 miles north), Linslade (6 miles west), Shefford (12 miles north-east), Ampthill (8 miles north) and Lower Stondon (12 miles north-east).

Around Thorn

Typical jobs here are in homes near Houghton Regis Primary School, All Saints Academy Dunstable and The Red Lion Public House. The nearest railway station is Leagrave station, about 3.6 miles east of the centre. Other landmarks nearby include Chalgrave Castle (1.7 miles north) and South Bedfordshire (0.5 miles north-west). Open spaces near Thorn include Smithcombe Hill and Sewell Cutting.

Map of Thorn © OpenStreetMap contributors

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

What you get with us

  • No extra charge for your area
  • Straight answers about what a repair can do
  • CHAS and Constructionline accredited
  • One visit for most repairs

Take a look at our full price list.

Common problems we fix in Thorn

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

It’s worth getting a quote if you see:

  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

Questions to ask before you book

  • What the guarantee covers, and for how long
  • Whether they match the colour on site
  • How long it needs to cure
  • Who turns up on the day

10 questions to ask before you book

Landlords, agents and businesses in Thorn

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

When a repair is not the answer

We would rather lose a job than do one that won’t last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before you book.

Surfaces we repair

  • Shower trays
  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

How we price non-slip bath coating

Quotes are free and the price is fixed. What we look at:

  • Previous DIY repairs that have to come out
  • The material and finish
  • Where the damage is and how we get to it
  • Whether we combine several jobs

Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Getting a price from photos

Before you send photos, a few simple things make all the difference:

  • One sharp close-up of the damage
  • The material, if you know it
  • The postcode, so we can plan the visit
  • Natural light rather than flash

Upload a photo of the damage and a wider shot of the entire item, with your LU5 postcode, and we’ll reply with a fixed price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.