Staffordshire · England

Non-slip bath & shower coating in Walford, Staffordshire

Local non-slip bath coating for Walford: photo quotes, tidy work and a year’s guarantee.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Walford

Walford questions

Can you quote from pictures?

Normally, yes. A close-up and a wider photo are enough to give a fixed quote.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children.

Do you work in Walford?

Yes, we do. We send a technician to Walford for every job, with no extra charge for travel.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you do work for letting agents?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Will there be a smell?

Expect a mild smell while we are working that clears as it cures.

What does non-slip bath coating cost?

The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Can I add another job to the visit?

Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.

How we handle non-slip bath coating in Walford

It’s a clear, textured coating, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. Common call-outs are for safety for older or less mobile people and bath mats that harbour mould or get forgotten, in enamelled baths, acrylic baths and shower trays.

You’re covered for a year from the day of the repair. If anything is not right, ring us and we will come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Location
Walford (ST21)
County
Staffordshire
Cover
12 months on all our work
Price
Free and fixed, from your pictures
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Honest limits

We won’t take on work that will not last, so these are the limits:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before booking.

Materials we work on in Walford

  • Resurfaced baths
  • Shower trays
  • Enamelled baths
  • Wet room floors (ask us)
  • Acrylic baths

Prices and what affects them

Every quote is fixed and free. What we take into account:

  • Where the damage is and how we get to it
  • How hard the colour is to match
  • The material and finish
  • How much damage there is

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Quotes from your photos

We price nearly every job from photos. This is what we need:

  • Your postcode, so we can check dates
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area
  • Something in shot to show the size

Most clients in Walford get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

About Walford

Walford is about 5 miles west of Stone, in Staffordshire. Our technicians come to homes and businesses in Walford and the surrounding area, so nothing has to leave your home. Our repair technicians cover 512 places in Staffordshire, from the larger towns to small villages. We work right across the region, from Walford to Birmingham (about 34 miles away).

All of ST21 is within our area. Other places close to Walford include Standon (1 mile north-west), Bowers (1 mile north), Cotes Heath (1 mile north-east), Cranberry (1 mile north) and Cotes (2 miles east). Within a short drive, we also cover Stafford (9 miles south-east), Newcastle-under-Lyme (8 miles north), Longton (8 miles north-east), Stone (5 miles east), Biddulph (15 miles north) and Alsager (14 miles north).

Near you in Walford

Locally, our jobs take us to homes close to All Saints CofE (C) First School and Church of All Saints, among other places. Walford’s nearest station is Stone station, about 4.8 miles east. Well-known places in the area include Eccleshall Castle (2.8 miles south). Green spaces nearby include Cop Mere and Jackon's Coppice and Marsh.

Map of Walford © OpenStreetMap contributors

Do you need non-slip bath coating in Walford?

Smooth surfaces are easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

These are the problems we’re asked about most:

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten

What your quote should include

  • What aftercare is recommended
  • What the guarantee covers, and for how long
  • Who turns up on the day
  • What prep work is covered

Our hiring checklist

Work for landlords and builders

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Landlords, letting agents and housing providers in Walford use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Why repair rather than replace?

The alternatives are a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. Our prices are the same across the UK, with no extra for Walford. The job itself decides the price: how much damage, what it’s made of and how many items.

Why us?

  • A year’s guarantee on all work
  • One price list for the whole UK
  • CHAS, Constructionline and SafeContractor accredited
  • Everything repaired in place

Take a look at our full price list.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

What we do, step by step

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and tell you when it’s ready to use.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, generally overnight.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Keep a parking space free if you can
  • Clear the area around the damage

Ask for a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them over. You’ll get a fixed quote, not an estimate.

Send photos for a quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.