Staffordshire · England

Non-slip bath & shower coating in Standon, Staffordshire

Our repair technicians come to Standon for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Standon homes

Do you need non-slip bath coating in Standon?

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

It’s worth getting a quote if you see:

  • Safety for older or less mobile people
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

Questions to ask before booking

  • How the room is protected while they work
  • How the colour is matched
  • What aftercare is recommended
  • How long it needs to cure

Our hiring checklist

Non-slip bath coating in Standon, done in place

The coating is clear and textured, so the bath looks much the same. It’s popular with older people, families and holiday lets. We regularly repair shower trays, enamelled baths and wet room floors (ask us), and common reasons people get in touch are bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth.

All our work comes with our one-year guarantee, wherever you are in Staffordshire. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Before and after: an old shower tray refinished by Surface Doctor
Location
Standon (ST21)
Region
Staffordshire
Cover
12 months on all our work
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Where we work around Standon

Standon is about 6 miles west of Stone, in Staffordshire. Whether you are in the middle of Standon or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We work in all 512 towns and villages across Staffordshire. Our nearest city page is Birmingham, about 35 miles away.

All of ST21 is within our area. Local streets include Chatcull Lane, Maer Lane and Mill Lane, all of which we cover. Other places close to Standon include Bowers (1 mile north-east), Walford (1 mile south-east), Cranberry (1 mile north-east), Cotes Heath (1 mile east) and Cotes (2 miles east). We also work in nearby towns such as Stafford (10 miles south-east), Newcastle-under-Lyme (8 miles north), Longton (8 miles north-east), Stone (6 miles east), Biddulph (15 miles north) and Alsager (13 miles north).

Around Standon

Typical jobs here are in homes near All Saints CofE (C) First School and Church of All Saints. Further afield, we also cover the area around Castle Hill (3.3 miles north-west). The countryside around Standon includes Jackon's Coppice and Marsh and Cop Mere.

Map of Standon © OpenStreetMap contributors

Landlord and trade work in Standon

We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.

We work for landlords, letting agents and housing providers in Standon as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Why us?

  • One-year guarantee on every repair
  • No need to remove anything
  • One visit for most repairs
  • One price list for the entire UK

Read our prices page.

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

What a repair cannot fix

Before booking, it’s worth knowing the limits too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think before you book.

Materials we repair

  • Shower trays
  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Resurfaced baths

Questions from Standon

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can I get a quote without a visit?

Nearly always. If pictures do not show enough, we’ll ask for another angle.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

Do I need to be at home?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

How soon can you come?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

Do you work for landlords and businesses?

Yes, frequently. We can quote for several properties together and work between tenancies.

Is there any odour?

Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.

How the visit works

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. It normally takes a few hours, and we will keep you posted as we go.

  1. First the standing area is cleaned and degreased.
  2. We mask out the area to be treated.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, typically overnight.

Before we arrive

  • Let the surface dry out before the visit
  • Mention any earlier repairs or resurfacing
  • Tell us about parking, stairs or access

How to get a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Get a fixed quote

Related advice

Prices and what affects them

We do not charge extra for travel to Standon. The price comes down to:

  • How many items we do on one visit
  • How many areas need work
  • Unusual colours or finishes
  • What kind of damage it is

A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.

Quotes from your photos

Phone photos are fine. Just make sure we can see:

  • Something in shot to show the size
  • A clear, close picture of the problem area
  • Whether it’s been repaired or coated before
  • The postcode, so we can plan the visit

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.