Bradford · England

Non-slip bath & shower coating in Wyke Common, Bradford

Non-slip bath coating across Wyke Common and nearby, typically in one visit and guaranteed for a year.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Wyke Common

Non-slip bath coating in Wyke Common without replacing anything

It suits older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Whether it’s a bath or tray that is slippery when wet and resurfaced baths that are now too smooth, we can generally put it right, on shower trays, resurfaced baths and acrylic baths alike.

All of our repairs are guaranteed for twelve months. We return to put right any problem with the work. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Location
Wyke Common (BD12, BD19)
County
Bradford
Cover
A year, on every repair
Quotes
Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating treats your existing bath or tray. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why Wyke Common clients choose us

  • Technicians who travel to you, UK-wide
  • Every repair guaranteed for a year
  • Nothing taken out or refitted
  • Accredited with CHAS, Constructionline and SafeContractor

Take a look at our prices page.

Prices and what affects them

We give every job a fixed price from pictures. These are the things that affect it:

  • Doing more than one item at once
  • How easy the damage is to reach
  • Whether old repairs or coatings need taking off
  • The type of damage

The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.

Getting a price from pictures

A couple of clear pictures is all it takes. Try to include:

  • Details of any past repairs
  • A coin beside the damage so we can judge size
  • Where you are, by postcode
  • Good light, ideally daylight, without flash glare

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.

For landlords and businesses

For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.

Housing associations and facilities teams use us for planned and reactive repairs in Bradford and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

The process

On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take a morning or an afternoon, including clearing up.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. We leave it to cure, typically overnight.

Before we arrive

  • Avoid using the area for a few hours before we arrive
  • Make sure the room can be ventilated
  • Let us know if it has been repaired before

Ask for a price

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Get a free quote

Read more

About Wyke Common

Wyke Common is about 2 miles north of Brighouse, in Bradford. From the centre of Wyke Common to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Wyke Common is one of 140 towns and villages in Bradford where we work. We work right across the region, from Wyke Common to Leeds (10 miles away).

All of BD12 and BD19 is covered, from the main roads to the quietest streets. Jobs here include addresses on Wyke Lane, Clare Road and Green Lane and the roads around them. With the A58 close by, Wyke Common is simple for us to get to. We also travel to Wyke (1 mile south-west), Lower Wyke (1 mile south-west), Scholes (1 mile south-east), Norwood Green (1 mile west) and Low Moor (1 mile north). Larger places within reach include Bradford (4 miles north), Keighley (11 miles north-west), Bingley (8 miles north), Shipley (6 miles north), Baildon (8 miles north) and Great Horton (3 miles north).

Near you in Wyke Common

Typical jobs here are in homes near Wyke Lion pub, Lightcliffe Academy and Westfield United Reform Church, among other places. Wyke Common’s nearest station is Low Moor station, about 1 mile north-east. Other landmarks nearby include Westwood Park Community Hospital (2.9 miles north-west) and Westfield Bradford (4 miles north).

  • Local facilities include Halifax Rural District (2.5 miles south-west)
Map of Wyke Common © OpenStreetMap contributors

Do you need non-slip bath coating in Wyke Common?

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

The things clients generally mention when they call are:

  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

Comparing quotes

  • How to care for the finish
  • Whether the price covers travel
  • How changes to the job are handled
  • How soon you can use it again

10 questions to ask before you book

What a repair can’t fix

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think before booking.

Materials we repair

  • Shower trays
  • Resurfaced baths
  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)

FAQs for Wyke Common

When can you do it?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Is there a call-out fee?

There is no separate call-out charge. Your fixed price includes everything.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What if the damage is worse than the pictures show?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Do you cover Wyke Common?

We do. We send a technician to Wyke Common for every job, with no extra charge for travel.

Is repairing better than replacing?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

What does non-slip bath coating cost?

The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.